General discussions, chit-chat
February 25th, 2010, 13:26
I have been looking around at companies I am familiar with for new job opportunities, but they all require previous hands on experience with all aspects of data recovery, PC3K, clean room work, etc. Due to cost, some of these things are impossible for me to do. Do any places have entry level, Logical / software recovery positions where these skills can be learned? Or do I just have to suck it up and save up the $$$ for the tools and teach myself? I have a very good understanding of hard drives, file systems, logical recovery, and have theory and knowledge regarding the work I have not been able to do.
February 26th, 2010, 3:58
No one wants to teach all this stuff , you are on your own .
February 26th, 2010, 14:59
I wasn't asking for anyone to teach me, I haven't been tough anything I know, I have learned it on my own (of course with the guidance of amazing gurus on here and personal research) I was asking if any companies have agents who one do logical recoveries but have the resources where the agent can learn / develop their skills.
March 28th, 2010, 4:23
hello friend,
Pm me will guide you properly.
March 28th, 2010, 6:36
Check this forum for diskanalyzers first.
A simple search will teach you a lot about them.
I dont know if they have changed in the positive sense, so be carefull.
Dobre
March 28th, 2010, 23:00
Good luch with you.

, working hard is needed in the data recvoery line.
March 31st, 2010, 17:16
dobrevjetser wrote:Check this forum for diskanalyzers first.
A simple search will teach you a lot about them.
I dont know if they have changed in the positive sense, so be carefull.
Dobre
I searched around the site, Thanks for the heads up Dobre!
April 1st, 2010, 5:54
many companies advertising here and still people think its bad.. even every one some how do advertisment what they do in different ways.. my friends also can search in this forum you will find as well..
April 1st, 2010, 6:58
disktech wrote:many companies advertising here and still people think its bad.. even every one some how do advertisment what they do in different ways.. my friends also can search in this forum you will find as well..

No advertising from me. And the advertisers are consistently from the same companies....
April 1st, 2010, 11:11
we are looking for one but preferd a bit more experience.
April 3rd, 2010, 5:37
we have also well experienced data recovery technicians if required pm me
April 3rd, 2010, 13:09
disktech wrote:we have also well experienced data recovery technicians if required pm me

Experienced in recovery of user critical data, or experience in using SD tools? This is not the same thing...
April 5th, 2010, 18:26
I wasn't asking for a job, was just asking if it would even be possible to move to a respected / reputable company with only really logical experience. Maybe if we actually get PC3000 and Deepspar that would help my odds. I have absolutely no interest in SD products due mainly to reading up here on the forums and conversations I have had with respected Gurus
April 5th, 2010, 19:04
If you tried to apply for a job at a DR company with only SD skills they would probably laugh and show you the door.
April 6th, 2010, 4:48
hddguy wrote:disktech wrote:we have also well experienced data recovery technicians if required pm me

Experienced in recovery of user critical data, or experience in using SD tools? This is not the same thing...
My friend iam talking about same you are asking !.. expereince in user critical data recovery.. im talking about logical and physical including platter swapping , head alignment, platter alignment using different kind of tool not only SD..
April 6th, 2010, 6:12
disktech wrote:hddguy wrote:disktech wrote:we have also well experienced data recovery technicians if required pm me

Experienced in recovery of user critical data, or experience in using SD tools? This is not the same thing...
My friend iam talking about same you are asking !.. expereince in user critical data recovery.. im talking about logical and physical including platter swapping , head alignment, platter alignment using different kind of tool not only SD..

Maybe you do use other tools, but you seem to be a real fan of SD. In my opinion, this would only happen if you have no basis for comparison....
April 7th, 2010, 4:30
hddguy wrote:disktech wrote:hddguy wrote:disktech wrote:we have also well experienced data recovery technicians if required pm me

Experienced in recovery of user critical data, or experience in using SD tools? This is not the same thing...
My friend iam talking about same you are asking !.. expereince in user critical data recovery.. im talking about logical and physical including platter swapping , head alignment, platter alignment using different kind of tool not only SD..

Maybe you do use other tools, but you seem to be a real fan of SD. In my opinion, this would only happen if you have no basis for comparison....
my friend i think you didnt read my post ;im using different kind of tools to fix drives for data recovery.. webiste is my buisness website as reseller if you can see im also other tools reseller as well..im not fan for any tools im realistic business person. if data can be recover from salvation yes iam fan for salvation if data can be recover from pc3000 yes also fan for acelab.. even if data can be restore from chunhua also be Fan of chunhua tools.. hope you understand now..

cheers
if you want to know more contact me on msn
I have four technicians who want to work for data recovery company as data recovery technician
April 7th, 2010, 7:48
If you devote some more time to learning, you'll be able to go to many companies. Th won't be a problem
April 7th, 2010, 14:40
Money fan wrote:If you devote some more time to learning, you'll be able to go to many companies. Th won't be a problem
Definitely devoting the time, I spend almost more time doing research and practicing at home then I do at work

I appreciate the feedback all!
Powered by phpBB © phpBB Group.