hi

firstly we need resistor 22 ohm and i.c rom "sstlf020a or winbond25x20"

2060-701477-002 rev A and 2060-701444-004
>>> remove resistors r74&r75 and add flashed i.c rom

2060-701590-000
>>> add resistor 22 ohm in r36 and add flashed i.c rom in u12

2060-771642-002 rev p1 and 2060-701640-001 rev A
>>> add resistor 22 ohm in r74 and add flashed i.c rom

2060-701450-011 and 2060-701499-000
>>> remove resistors r13&r6 and add flashed i.c rom

-----------------------
wdr.agent

thanks alot
i will try it now

very good method . i tried it and worked well
but i also need method to repair 2060-701537-G00
THNX

i didn't find method to repair 701537 yet

very good method thank you to share

_________________
to carry and to save firmware seagate

friend moiz , i can't reply by pm
but just do that and without any commands

PM Sent....

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein