method to repair wd pcb which stoped because of bad firmware

[wdr.agent]

hi

firstly we need resistor 22 ohm and i.c rom "sstlf020a or winbond25x20"

2060-701477-002 rev A and 2060-701444-004
>>> remove resistors r74&r75 and add flashed i.c rom

2060-701590-000
>>> add resistor 22 ohm in r36 and add flashed i.c rom in u12

2060-771642-002 rev p1 and 2060-701640-001 rev A
>>> add resistor 22 ohm in r74 and add flashed i.c rom

2060-701450-011 and 2060-701499-000
>>> remove resistors r13&r6 and add flashed i.c rom

-----------------------
wdr.agent

[hawk_wd]

thanks alot
i will try it now

[hawk_wd]

very good method . i tried it and worked well
but i also need method to repair 2060-701537-G00
THNX

[wdr.agent]

i didn't find method to repair 701537 yet

[fabio]

very good method thank you to share

[wdr.agent]

friend moiz , i can't reply by pm
but just do that and without any commands

[einstein9]

very good method thank you to share

PM Sent....