February 5th, 2020, 23:41
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-30deepin-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
Serial Number: WDEMF4TZ
LU WWN Device Id: 5 000c50 0ab8ceb17
Firmware Version: SDM3
User Capacity: 970,199,064,576 bytes [970 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Feb 6 11:14:17 2020 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 156) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 080 064 006 Pre-fail Always - 99359574
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 648
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 071 060 045 Pre-fail Always - 11572779
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 447 (176 187 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 607
184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 24
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 074 053 040 Old_age Always - 26 (Min/Max 26/27)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2185
194 Temperature_Celsius 0x0022 026 047 000 Old_age Always - 26 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 178 000 Old_age Always - 11311
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 386 (50 41 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2500235327
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 8662531049
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 446 -
# 2 Short offline Completed without error 00% 446 -
# 3 Short offline Completed without error 00% 446 -
# 4 Extended offline Aborted by host 90% 419 -
# 5 Short offline Completed without error 00% 419 -
# 6 Short offline Completed without error 00% 369 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
February 6th, 2020, 13:32
February 7th, 2020, 0:23
fzabkar wrote:The drive could have a HPA (Host Protected Area). You can remove the HPA with tools such as HDAT2, hdparm, Seatools for DOS, HDD Capacity Restore Tool.
February 7th, 2020, 21:13
February 8th, 2020, 6:03
fzabkar wrote:The HPA feature set may be hidden by a DCO. If so, then HDAT2 should be able to work around this.
February 8th, 2020, 15:38
February 9th, 2020, 0:09
fzabkar wrote:Q2: How to bypass a Security and/or DCO frozen state?
https://www.hdat2.com/hdat2_faq.html#q2
Powered by phpBB © phpBB Group.