All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: LOL!
PostPosted: January 11th, 2025, 19:14 
Offline

Joined: September 17th, 2016, 16:06
Posts: 447
Location: India
lol!

https://www.youtube.com/watch?v=U-zuK9cZ_KY

--

_________________
THERE IS ALWAYS HOPE TILL YOU LOSE IT.


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 12th, 2025, 8:22 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1212
Location: United Kingdom
That meme insert of the kid with the mop - spot on. But we're going to need to have a chat about your use of aluminium tape ...

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 12th, 2025, 8:29 
Offline

Joined: September 17th, 2016, 16:06
Posts: 447
Location: India
thanks for the view!

hehe..i know this wasn't a perfect perfect approach to many things.
Even if i took time and got the magic pads to fix the socket, the RAM would have still created problems.

The tape should have come first on the board then flux should have been put..Tapes lose out on adhesiveness any way when they get in contact with isoprop or flux.

I just got some paper tape too..lets see how that turns out..

even my de soldering wick was not a quality braid and on top of it it was 2mm braid that i use for vacuum tube amps :D

My lab just ran out of supplies...now all inventory is set again.
--

_________________
THERE IS ALWAYS HOPE TILL YOU LOSE IT.


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 12th, 2025, 9:13 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1212
Location: United Kingdom
If you recovered the data safely it doesn't matter how you got there. If it were me though Id forget the tape completely, it's not doing anything for you. :wink:

My money would be on that crack being pry damage from the previous tech removing the pcb - you have to love them.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 12th, 2025, 11:44 
Offline

Joined: September 17th, 2016, 16:06
Posts: 447
Location: India
Yes no bits were man-slaughtered.
Tapes are debatable.
Yes probably the tech tried to open the PCB in a wrong way from the edge!

--

_________________
THERE IS ALWAYS HOPE TILL YOU LOSE IT.


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 12th, 2025, 12:42 
Offline

Joined: September 17th, 2016, 16:06
Posts: 447
Location: India
btw thanks Lardman for watching it! :D Just forgot to say you a Thankyou. How is DR market doing in your country at the moment?

--

_________________
THERE IS ALWAYS HOPE TILL YOU LOSE IT.


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 13th, 2025, 5:25 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1212
Location: United Kingdom
I watch everyone's content - mainly to see what Im doing wrong :lol: and to covert their shiny new tools.

The UK is a small place with an over saturation of DR service providers of varying skill levels all vying for the same clients.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 13th, 2025, 9:29 
Offline
User avatar

Joined: May 13th, 2019, 7:50
Posts: 1061
Location: Nederland
I watched. I just disabled sound :lol:

_________________
Joep - http://www.disktuna.com - video & photo repair & recovery service


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 13th, 2025, 11:32 
Offline

Joined: September 17th, 2016, 16:06
Posts: 447
Location: India
hahaha. The music is spooky and it was an accident. I had made this background music that you find at the end of the video and I tried to import my mixdown into Reaper (DAW). Apparently my audio buffers were set wrongly or the audio driver was giving some issues and it made the whole track sluggish and it sounded spooky...i just recorded this new version with the buggy audio driver and BAM we have spooky ear bleeding music. :D

--

_________________
THERE IS ALWAYS HOPE TILL YOU LOSE IT.


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 13th, 2025, 18:09 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4550
Location: Hungary
... and you believed that stupid parrot... its advice was just as pointless... why bother with the usb connector and its resistors, you convert to sata anyway :)

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 14th, 2025, 14:13 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16285
Location: Australia
... and you don't need to remove the oscillator. Disconnecting the coupling capacitors is enough.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 15th, 2025, 5:30 
Offline

Joined: September 17th, 2016, 16:06
Posts: 447
Location: India
Hey beautiful people. Thanks for watching!

Hi Pepe!!!! so good to see you on this thread. Post clean up and preparation of the resistors and socket, i realized that I had no magic pads and really didnt want to do a jumpering work.

So now we will have another socket reworking video in which the parrot is heart broken because you called him stupid! :lol: :lol: (More content)

Fzabkar!!!! hello hello... well you are right. However for mental peace I dont want the USB bridge to chit chat at all with the MCU. (NO TALKING IN MY CLASS!) . I dont know what more control or data signals route from this chip to MCU apart from SATA differential lines.

--

_________________
THERE IS ALWAYS HOPE TILL YOU LOSE IT.


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 15th, 2025, 5:56 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4550
Location: Hungary
sorry for your parrot, i hoped he/she would not listen or take it too seriously...

i doubt there are any other signals between the mcu and the bridge than the sata lanes. Anyway, i never bothered blocking the oscillator if the caps were removed and it works seamlessly.

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: LOL!
PostPosted: January 15th, 2025, 6:42 
Offline

Joined: September 17th, 2016, 16:06
Posts: 447
Location: India
my parrot is doing well with two lemons...just hanging down there well always looking to mate :D

point noted well for not blocking the osc!

:D
much love

--

_________________
THERE IS ALWAYS HOPE TILL YOU LOSE IT.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group