MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
wizz
 Post subject: WD3200AAKS-75L9A0 flashed with wrong fw version
PostPosted: March 30th, 2014, 9:28 
Offline

Joined: December 12th, 2012, 19:22
Posts: 6
Location: Belgrade
after After replacing the board WD3200AAKS-75L9A0,flashed with wrong fw version(from tornado 2d).
How do I restore the original firmware (192kb) which I have (pinaclelite),with WDR, or some tips with jumpers...
Thanks
Top
 Profile  
 
longlife
 Post subject: Re: WD3200AAKS-75L9A0 flashed with wrong fw version
PostPosted: March 30th, 2014, 23:32 
Offline

Joined: December 9th, 2010, 2:59
Posts: 241
Location: kolkata
Before we sit down to analyse, please say which version of wdr has been used and what is hdd's module u have flashed.
Top
 Profile  
 
wizz
 Post subject: Re: WD3200AAKS-75L9A0 flashed with wrong fw version
PostPosted: April 5th, 2014, 3:33 
Offline

Joined: December 12th, 2012, 19:22
Posts: 6
Location: Belgrade
I have version 3.0. Wrong firmware (flashed)=WD3200AAKS-00VYA0_12.01B02 (587S.bin), need to reflash with WD3200AAKS-75L9A0 (01CS.bin),The first thing I want to know,can I rewrite the firmware with a setting Jumer or through the serial port, there are probably serial pins as Samsung or Seagate,
Thanks
Top
 Profile  
 
longlife
 Post subject: Re: WD3200AAKS-75L9A0 flashed with wrong fw version
PostPosted: April 6th, 2014, 6:45 
Offline

Joined: December 9th, 2010, 2:59
Posts: 241
Location: kolkata
Have u tried reflashing with wdr + WD3200AAKS-75L9A0. wdr needs no jumper or serial port like sasung or seagate.
Top
 Profile  
 
wizz
 Post subject: Re: WD3200AAKS-75L9A0 flashed with wrong fw version
PostPosted: April 6th, 2014, 9:02 
Offline

Joined: December 12th, 2012, 19:22
Posts: 6
Location: Belgrade
yes, and interesting, always is the same: "Erase Flash - FFFF=NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG" folowing with: "Write Flash - FFFF=NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG", but nothing happens with rom in backgroud "IN BKG"
Top
 Profile  
 
BGman
 Post subject: Re: WD3200AAKS-75L9A0 flashed with wrong fw version
PostPosted: April 15th, 2014, 16:38 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
longlife wrote:
Have u tried reflashing with wdr + WD3200AAKS-75L9A0. wdr needs no jumper or serial port like sasung or seagate.


Wrong. Jumpers have to be set in order to start the drive in safe mode.
Top
 Profile  
 
longlife
 Post subject: Re: WD3200AAKS-75L9A0 flashed with wrong fw version
PostPosted: April 20th, 2014, 10:07 
Offline

Joined: December 9th, 2010, 2:59
Posts: 241
Location: kolkata
Thanx bgman for the information.

What i know is win WDR5.3 no jumper setting is necessary. Will u please clarify for knowledge sake.
Top
 Profile  
 
BGman
 Post subject: Re: WD3200AAKS-75L9A0 flashed with wrong fw version
PostPosted: May 17th, 2014, 10:39 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
longlife wrote:
Thanx bgman for the information.

What i know is win WDR5.3 no jumper setting is necessary. Will u please clarify for knowledge sake.


To flash a new ROM to a drive you need the drive to be in "safe" mode.
The easiest way to set a drive in safe mode is by using jumpers.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group