HDD scan result

[gOber^]

Hi,

Please somebody read my scan result. Coz im newbee.

Left pic Hitachi 160gb, and right is Seagate 160gb ( I found error at UltraDMA CRC) <-- this is very risk or not?




Left pic WDC 320gb, and right is Seagate 40gb (ignore right pic coz its too old my hd, but i fund same error ULTRADMA CRC on my WDC HD)




Someone can tell me what the better my HD to backup file? Hitachi 160gb or WDC 320gb

Thank you and sorry if my language English to bad

Regards,
gOber

[cryoborgofthevenus]

ST340016A is in "unhealthy" condition
WD3200AAJS is 95% Ok
ST3160211AS is also 95% OK but i don't like that drive model (:D)
HDT722516DLA380 seems very healthy to me.

Sorry I forgot to reply this question @ CHIP forum

Btw Ultra DMA CRC error rate should not make big problems for your drives. Just make sure, your PSU is good enough

[HardDiskBug]

C.Y.F.C. !!!!

[gOber^]

ST340016A is in "unhealthy" condition
WD3200AAJS is 95% Ok
ST3160211AS is also 95% OK but i don't like that drive model (:D)
HDT722516DLA380 seems very healthy to me.

Sorry I forgot to reply this question @ CHIP forum

Btw Ultra DMA CRC error rate should not make big problems for your drives. Just make sure, your PSU is good enough

Thank cryoborgofthevenus/hddstudio

Im not asking u more question @CHIP coz ga enak tanya trus so im regis here hehe..

Ok done.. thank you bro

[gOber^]

C.Y.F.C. !!!!

What you mean sir?

thanks

[Doomer]

UDMA errors may be caused by bad SATA cable, bap power supply or PC overclocking
In rare cases such errors may be caused by unstable PCB

[HardDiskBug]

C.Y.F.C. !!!!

What you mean sir?

thanks

Change Your F*****g Cables

[gOber^]

UDMA errors may be caused by bad SATA cable, bap power supply or PC overclocking
In rare cases such errors may be caused by unstable PCB

ok thank u for ur information sir

regards,
gober

[gOber^]

C.Y.F.C. !!!!

What you mean sir?

thanks

Change Your F*****g Cables

ok thank