HDD GURU FORUMS :: View topic

ST340016A is in "unhealthy" condition
WD3200AAJS is 95% Ok
ST3160211AS is also 95% OK but i don't like that drive model (:D)
HDT722516DLA380 seems very healthy to me.

Sorry I forgot to reply this question @ CHIP forum :wink:

Btw Ultra DMA CRC error rate should not make big problems for your drives. Just make sure, your PSU is good enough

HardDiskBug wrote:

C.Y.F.C. !!!!

What you mean sir?

thanks

UDMA errors may be caused by bad SATA cable, bap power supply or PC overclocking
In rare cases such errors may be caused by unstable PCB

gOber^ wrote:

HardDiskBug wrote:

C.Y.F.C. !!!!

What you mean sir?

thanks

Change Your F*****g Cables :mrgreen:

Author:	gOber^ [ February 6th, 2009, 7:27 ]
Post subject:	HDD scan result
Hi, Please somebody read my scan result. Coz im newbee. Left pic Hitachi 160gb, and right is Seagate 160gb ( I found error at UltraDMA CRC) <-- this is very risk or not? Left pic WDC 320gb, and right is Seagate 40gb (ignore right pic coz its too old my hd, but i fund same error ULTRADMA CRC on my WDC HD) Someone can tell me what the better my HD to backup file? Hitachi 160gb or WDC 320gb Thank you and sorry if my language English to bad Regards, gOber

Author:	cryoborgofthevenus [ February 6th, 2009, 7:36 ]
Post subject:	Re: HDD scan result
ST340016A is in "unhealthy" condition WD3200AAJS is 95% Ok ST3160211AS is also 95% OK but i don't like that drive model (:D) HDT722516DLA380 seems very healthy to me. Sorry I forgot to reply this question @ CHIP forum Btw Ultra DMA CRC error rate should not make big problems for your drives. Just make sure, your PSU is good enough

Author:	HardDiskBug [ February 6th, 2009, 7:39 ]
Post subject:	Re: HDD scan result
C.Y.F.C. !!!!

Author:	gOber^ [ February 6th, 2009, 7:42 ]
Post subject:	Re: HDD scan result
cryoborgofthevenus wrote: ST340016A is in "unhealthy" condition WD3200AAJS is 95% Ok ST3160211AS is also 95% OK but i don't like that drive model (:D) HDT722516DLA380 seems very healthy to me. Sorry I forgot to reply this question @ CHIP forum Btw Ultra DMA CRC error rate should not make big problems for your drives. Just make sure, your PSU is good enough Thank cryoborgofthevenus/hddstudio Im not asking u more question @CHIP coz ga enak tanya trus so im regis here hehe.. Ok done.. thank you bro

Author:	gOber^ [ February 6th, 2009, 7:43 ]
Post subject:	Re: HDD scan result
HardDiskBug wrote: C.Y.F.C. !!!! What you mean sir? thanks

HDD GURU FORUMS http://forum.hddguru.com/

HDD scan result http://forum.hddguru.com/viewtopic.php?f=7&t=11225	Page 1 of 1

Author:	Doomer [ February 6th, 2009, 10:25 ]
Post subject:	Re: HDD scan result
UDMA errors may be caused by bad SATA cable, bap power supply or PC overclocking In rare cases such errors may be caused by unstable PCB

Author:	HardDiskBug [ February 6th, 2009, 10:29 ]
Post subject:	Re: HDD scan result
gOber^ wrote: HardDiskBug wrote: C.Y.F.C. !!!! What you mean sir? thanks Change Your F*****g Cables

Author:	gOber^ [ February 6th, 2009, 18:52 ]
Post subject:	Re: HDD scan result
Doomer wrote: UDMA errors may be caused by bad SATA cable, bap power supply or PC overclocking In rare cases such errors may be caused by unstable PCB ok thank u for ur information sir regards, gober

Author:	gOber^ [ February 6th, 2009, 18:53 ]
Post subject:	Re: HDD scan result
HardDiskBug wrote: gOber^ wrote: HardDiskBug wrote: C.Y.F.C. !!!! What you mean sir? thanks Change Your F*****g Cables ok thank

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/