HDD GURU FORUMS
http://forum.hddguru.com/

MHDD fails to detect my HDD
http://forum.hddguru.com/viewtopic.php?f=7&t=11460
Page 1 of 1

Author:  Xev [ March 1st, 2009, 18:17 ]
Post subject:  MHDD fails to detect my HDD

I have Gigabyte MB on P35 with ICH9R southbridge. This MB has 4 SATA ports and one PATA port. MHDD can find SATA drives without any issues, but it cannot find anything on PATA port. I also have PATA PCI board and when i connect my drives via this board MDD can detect them without any issues, but then erase will only work in PIO mode, which is dead slow.
I suspect this is happening because PATA channel is set as IDE channel 4 on this MB and MHDD only checks channel 0 and channel 1. Any ideas if i can fix this issue ?

Author:  Xev [ March 4th, 2009, 5:58 ]
Post subject:  Re: MHDD fails to detect my HDD

Seriously, nobody has any ideas whatsoever ?

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/