Has anybody here the english HDDL 3.1 version?
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| MHDD able to copy PCB-FLASH information? http://forum.hddguru.com/viewtopic.php?f=7&t=13025 |
Page 1 of 1 |
| Author: | Rob2222 [ August 17th, 2009, 13:34 ] |
| Post subject: | MHDD able to copy PCB-FLASH information? |
Hello, is MHDD able to extract information from the controller of a WD1600BEVS-07RTS0 from a half-bad (working for 30 seconds) PCB to a good one? I opened a hardware thread here: pcb-swap-wd1600bevs-07rts0-good-pcb-here-already-t13024.html BR and thanks in advance Robert |
|
| Author: | Nirvanowiec [ August 17th, 2009, 16:55 ] |
| Post subject: | Re: MHDD able to copy PCB-FLASH information? |
http://yura.projektas.lt/files/wd/mhdd/wd_royl_rom.html http://yura.projektas.lt/files/wd/mhdd/index.html |
|
| Author: | Rob2222 [ August 17th, 2009, 19:38 ] |
| Post subject: | Re: MHDD able to copy PCB-FLASH information? |
Thanks for the link. In the scripts is a RESET command. My MHDD version only knows the RST command. Do I need a older version? Another thing is which areas I need to copy and with which command to write back the files? BR Robert |
|
| Author: | Nirvanowiec [ August 18th, 2009, 3:39 ] |
| Post subject: | Re: MHDD able to copy PCB-FLASH information? |
MHDD 4,5 http://yura.projektas.lt/files/wd/hddlsct/index.html http://www.t13.org |
|
| Author: | Rob2222 [ August 18th, 2009, 12:51 ] |
| Post subject: | Re: MHDD able to copy PCB-FLASH information? |
Has anybody here the english HDDL 3.1 version?
|
|
| Author: | Rob2222 [ August 18th, 2009, 16:38 ] |
| Post subject: | Re: MHDD able to copy PCB-FLASH information? |
Does anybody know the vendor specific command for writing data back to the marvell flash on WD marvell drives? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|