Page 1 of 1
Software for building HP Delayed RAID
Posted: April 1st, 2010, 1:37
by MANDR
Is there any commercial software than can build a RAID with delayed parity? I need to build a RAID 5 with delay of 32. So far, I can only build with custom RAID layout in R-Studio but takes long time and im not sure results are accurate
thanks
Re: Software for building HP Delayed RAID
Posted: April 1st, 2010, 3:07
by itconcept
HI
try with Run Time Raid Reconstructor & UFS Explorer.
Re: Software for building HP Delayed RAID
Posted: April 1st, 2010, 3:08
by CK
Winhex
Re: Software for building HP Delayed RAID
Posted: April 1st, 2010, 3:17
by MANDR
Thanks for replies. Raid Reconstructor does not support the delay, UFS does but filesystem is damaged, would prefer to build in winhex and image, but Winhex delay support is limited to 16 delays
Re: Software for building HP Delayed RAID
Posted: July 14th, 2010, 12:53
by book14
MANDR wrote:Thanks for replies. Raid Reconstructor does not support the delay, UFS does but filesystem is damaged, would prefer to build in winhex and image, but Winhex delay support is limited to 16 delays
I think R-Studio will do it very well.
Re: Software for building HP Delayed RAID
Posted: July 15th, 2010, 2:26
by granaryloaf
R-Studio does this and so does File Scavenger.
Re: Software for building HP Delayed RAID
Posted: July 15th, 2010, 9:35
by einstein9
you may try ZAR, the latest ver. i think is 8.5
Re: Software for building HP Delayed RAID
Posted: July 16th, 2010, 2:43
by Nirvanowiec