Hi All!
(Forgive my bad English:))

Problem:
MHDD does not detect my SSD. What could be the reason? Is it normal for disk SSD?
BIOS detects ok.
MHDD only detects the DVD drive.
Normal HDDs detected ok.
Platform: Dell D630 Intel GM965
SSD is not blocked and there is no password.
Help!

You have to kick the Controller out of AHCI mode and put it in "Comparability mode" or whatever Dell calls it nowadays. You can do this via the system cmos menu.

I'm stupid
3 times I watched the bios and have not seen.
Thanks!

hi, help me too, please... I ran the MHDD in my Compaq, because mi USB Packard Bell Go isn't functionin' (I was resizing with the Gparted lived and the energy shut off, then the PB GO losed the firmware), but the system told: "Adaptec failed" or something else, i can't remember... then I can't use the USB or SCSI function of the MHDD... please help me...

@jryela,

Please don't hijack this thread. You already have a thread about your problem here:

packard-bell-t22426.html

You have already received advice in that thread, but you have not replied afterwards.