All times are UTC - 5 hours [ DST ]


Switch to mobile style


Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: hd tune pro analysis assistance please
PostPosted: April 18th, 2011, 16:35 
Offline

Joined: March 13th, 2011, 15:29
Posts: 70
Location: Greenville, MI
The computer that this drive runs is super super slow. I was able to run my usual cleaners, mbam, combofix, ccleaner, I cleaned out start up programs, I'm ready to format it. I figured out I'd give this software a try. I'm not familiar with it as of yet, could someone interrupt these results for me?

I ran it on my personal laptop and didn't get any warnings, how serious are these is my question. these were the only 3 I got.

Image


Top
 Profile  
 
 Post subject: Re: hd tune pro analysis assistance please
PostPosted: April 19th, 2011, 5:07 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 14946
Location: Australia
Those numbers are misleading. HD Tune's author is one of those annoying programmers who leaves out the uppermost 16 bits of the raw attribute values.

While the C4 and C5 attributes are properly correctly reported, I suspect that attribute 05 is a lot better than it looks.

Could we see a report, in hexadecimal, from HD Sentinel or HDDScan?

HD Sentinel (DOS / Windows / Linux):
http://www.hdsentinel.com/

HDDScan for Windows:
http://hddscan.com/

See this article for SMART info:
http://en.wikipedia.org/wiki/S.M.A.R.T.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: hd tune pro analysis assistance please
PostPosted: April 19th, 2011, 5:10 
Offline
User avatar

Joined: August 19th, 2007, 17:30
Posts: 1917
Location: In your hard drive.
You need to scan the drive from begining to end. :shock:

_________________
Buy your friends Toshiba\Hitachi and your enemies Seagate.


Top
 Profile  
 
 Post subject: Re: hd tune pro analysis assistance please
PostPosted: April 19th, 2011, 10:40 
Offline

Joined: March 13th, 2011, 15:29
Posts: 70
Location: Greenville, MI
I tried hddscan, the program opened up but when I went to select a drive, it had 2 spots open, but no information in those spots.

So I downloaded the trial of hd sentinel and got this:

http://www.cybersspot.com/Disk_report_2011_04_19_%20michelle.html

I searched through the help files and found nothing regarding HEX, what do I have to do to get that info to you?

Thanks so much for your help,
Dave


Top
 Profile  
 
 Post subject: Re: hd tune pro analysis assistance please
PostPosted: April 25th, 2011, 3:08 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 14946
Location: Australia
Sorry, I can't make sense of your drive's reallocated sector count, even after comparing it with others on the Internet. The raw value of attribute #5 appears to be showing 190 (=0xBE) reallocated sectors, yet its normalised value, ie health score , is still at 100.

I'd scan the drive and look for "slow" sectors, ie those that require several retries. MHDD, a DOS based utility, is probably the best for this.

http://www.cybersspot.com/Disk_report_2 ... helle.html

Code:
Hard Disk Model ID   :   TOSHIBA MK3263GSX
Firmware Revision   :   FG020A
5   Reallocated Sectors Count   50   100   100   0000000000BE
96   Reallocation Event Count   0   100   100   00000000008D
197   Current Pending Sector Count   0   100   100   000000000001

http://en.community.dell.com/support-fo ... 10317.aspx

Code:
Device Model:     TOSHIBA MK3263GSX
Firmware Version: FG020A
5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       794
96 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       331
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0

http://www.ihdd.ru/forum/smart-status-b ... t9004.html

Code:
TOSHIBA MK3263GSX
05 Reallocated Sector Count 50 1 1 2047
C4 Reallocation Event Count 0 100 100 408
C5 Current Pending Sector Count 0 100 100 0

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group