R-studio Did its thing
Nice trick cheers !
andy
Attachment:
server2003.JPG [ 329.54 KiB | Viewed 8631 times ]
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Image a Raid 0 Recovery dsk to Bootable Single Drive http://forum.hddguru.com/viewtopic.php?f=7&t=20235 |
Page 1 of 1 |
| Author: | buster80 [ August 10th, 2011, 10:38 ] |
| Post subject: | Image a Raid 0 Recovery dsk to Bootable Single Drive |
2 x SAS Raid 0 Recovered fine Clients I.T has requested an image of the complete install to try and boot the server install as It had SQL services running when it failed and some corruption may or may not have occurred. I have a good DSK from the toplevel and I have a romantic notion that it may work. Using r-Image to lay it back down to a single drive but it doesn't seem to let me for some reason. (greyed out) Question, alternative to R-Image that will allow imaging back to disk from .DSK ? Hope that made sense thanks andy |
|
| Author: | drc [ August 10th, 2011, 10:52 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
Winhex |
|
| Author: | buster80 [ August 10th, 2011, 10:54 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
good man |
|
| Author: | Alt(R-TT) [ August 11th, 2011, 4:42 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
R-Studio's built-in Copy module. |
|
| Author: | buster80 [ August 11th, 2011, 4:51 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
Quote: R-Studio's built-in Copy module. Big fan of r-studio, could you point me to this feature, I did not know it could do that thanks andy |
|
| Author: | Alt(R-TT) [ August 11th, 2011, 12:22 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
Object Copy. Open the image in R-Studio and copy it to the disk. |
|
| Author: | buster80 [ August 15th, 2011, 5:22 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
R-studio Did its thing Nice trick cheers ! andy Attachment: server2003.JPG [ 329.54 KiB | Viewed 8631 times ] |
|
| Author: | Nick_CT [ August 17th, 2011, 17:31 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
R-studio is a good bit of kit |
|
| Author: | positivebit [ August 18th, 2011, 10:11 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
hi , i have recovered sucesfully a raid 0 (2x 320GB SATA) imagined well into 2x500SATA. by R-studio i can build the array and save all folders and files fine. But if i put back the 2 hard drive to the pc ( the bios is setted to raid option for sata ) it show me: NON RAID DISK. if i simply attach the olds 320GB drives, it show correctly : DISK Members without touching anything in bios! Any idea why it happens? |
|
| Author: | hddguy [ August 19th, 2011, 10:50 ] |
| Post subject: | Re: Image a Raid 0 Recovery dsk to Bootable Single Drive |
What RAID controller do you use? Some controllers, like Intel Controllers as an example, identify valid mambers from Serial Numbers. Maybe this is you problem? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|