All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: MHDD batch autostart execution
PostPosted: December 14th, 2011, 5:25 
Offline

Joined: December 14th, 2011, 5:12
Posts: 2
Location: Italy
Dear all,
I have my own batch file for MHDD.
I need to start it automatically from a bootable usb key.
I can't find how to start it without pressing F5 key.
Does exist a line for MHDD.CFG to start automatically a batch without confirmation?

Thanks,
manzamanna


Top
 Profile  
 
 Post subject: Re: MHDD batch autostart execution
PostPosted: December 14th, 2011, 17:16 
Offline

Joined: May 6th, 2008, 22:53
Posts: 2138
Location: England
manzamanna wrote:
Does exist a line for MHDD.CFG to start automatically a batch without confirmation?

I haven't seen such a line for mhdd.cfg - but an alternative approach to achieve the same objective, would be to use a DOS (typically TSR) utility which simulates keystrokes, to simulate pressing F5. This type of DOS utility existed around 25 years ago, and I'm sure one could be found online, if you do a bit of searching... That is where I would be looking, if I was trying to achieve your stated objective.

Of course, if someone does know about a suitable line in mhdd.cfg then great :)


Top
 Profile  
 
 Post subject: Re: MHDD batch autostart execution
PostPosted: December 14th, 2011, 17:26 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3241
Location: USA
I would imagine such a "feature" would be dangerous enough to be purposely avoided by the coder

_________________
You don't have to backup all of your files, just the ones you want to keep.


Top
 Profile  
 
 Post subject: Re: MHDD batch autostart execution
PostPosted: December 14th, 2011, 17:30 
Offline

Joined: May 6th, 2008, 22:53
Posts: 2138
Location: England
Very true, of course, drc :) I am hoping that the OP knows what they are doing & accepts the risks (if their batch file could be destructive).


Top
 Profile  
 
 Post subject: Re: MHDD batch autostart execution
PostPosted: December 14th, 2011, 18:15 
Offline

Joined: December 14th, 2011, 5:12
Posts: 2
Location: Italy
thank you everybody
Damn, I need to stress test a lot of disks, the only acceptable way is the automated one.
If there is no solution, I will need to switch to a linux solution

The only thing I need, is to start automatically a random seek test and a surface scan for a couple of times, then dump the SMART table to a text file.

Any suggestion will be really appreciated.
thanks,
manzamanna


Top
 Profile  
 
 Post subject: Re: MHDD batch autostart execution
PostPosted: December 14th, 2011, 19:32 
Offline

Joined: May 6th, 2008, 22:53
Posts: 2138
Location: England
manzamanna wrote:
If there is no solution, I will need to switch to a linux solution

I have explained a solution for your original stated objective using MHDD, if you do some work yourself to find a suitable old DOS utility. I could easily spend a few minutes on Google to find one for you, but I like people to do at least some work for themselves, if I'm giving my help for free :)

I can think of a few different ways to achieve what you have now stated you want to do in Linux, but you'll need to do some work there too (depending on your skills with scripting and/or programming). You might want to investigate the smartmontools package, for gathering the SMART data.

Good luck with whatever you decide. I'll leave you to carry on from here :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group