HDD GURU FORUMS

Sorry ! My English is very poor.
This is a software used to change WD(Royl),Seaget(11.12) serial and model (Because it is only for their own use,so
there is no documentation) Share it now !
Need micorsoft .net 4.0

you better scan that well for Virus

I'm wondering where did you get these constants: eReadSingleCopy, eReturnFileInfo, etc.

Doomer wrote:I'm wondering where did you get these constants: eReadSingleCopy, eReturnFileInfo, etc.

What error

guru wrote:you better scan that well for Virus

This program is written by me ,and also be recompiled!
So,There is another program is used to lock/unlock WD Hard disk "PUIS"!

flykiller wrote:

Doomer wrote:I'm wondering where did you get these constants: eReadSingleCopy, eReturnFileInfo, etc.

What error

it is not an error
it's part of your source code in the vsc file

Also, looks kinda doubtful that it's gonna work for Seagates

Doomer wrote:

flykiller wrote:

Doomer wrote:I'm wondering where did you get these constants: eReadSingleCopy, eReturnFileInfo, etc.

What error

it is not an error
it's part of your source code in the vsc file

Haha,,I think ,I want the program to encrypt

encryption is always good
So, where did you get those constants?

Doomer wrote:encryption is always good
So, where did you get those constants?

This program is a function of another program.Therefore ,no encryption.
Part from WD Trex program.Partly from my own research.

guru wrote:you better scan that well for Virus :idea:

https://www.virustotal.com/file/07a3153 ... 331928943/

SHA256: 07a3153ad804869a1bcce73e8acc72411001baf4d347c9c424dca6f0c1c3af2c
File name: HDSerial.rar
Detection ratio: 0 / 43
Analysis date: 2012-03-16 20:15:43 UTC

flykiller wrote:

guru wrote:you better scan that well for Virus :idea:

This program is written by me ,and also be recompiled!
So,There is another program is used to lock/unlock WD Hard disk "PUIS"!

https://www.virustotal.com/file/9404390 ... 331929202/

SHA256: 9404390600e730ba7be3c6f24c88eec0df5aad842f8f49a5f0530db58ddc5b46
File name: PUIS.rar
Detection ratio: 0 / 43
Analysis date: 2012-03-16 20:20:02 UTC

flykiller wrote:This program is a function of another program.Therefore ,no encryption.
Part from WD Trex program.Partly from my own research.

Cool, thanks for answering

flykiller wrote:Part from WD Trex program.Partly from my own research.

Looking forward to more ...

Thanks in advance. ;-)

Carefully ,Flashed ROM there is great risk of the operation!

flykiller wrote:Carefully ,Flashed ROM there is great risk of the operation!

Note! This program must be in the same directory and hdserial program!

What part is from
you own research?

guru wrote:What part is from
you own research?

tv
Part of my main program!
Yes

flykiller wrote:Sorry ! My English is very poor.
This is a software used to change WD(Royl),Seaget(11.12) serial and model (Because it is only for their own use,so
there is no documentation) Share it now !
Need micorsoft .net 4.0

For Seagate:
If click "get" button can not be displayed serial number. You need to do the following steps:
1. Find serial number offset address
- run terminal program ,connect hd.
In F3>B921600 reset terminal program baudrate to 921600.in terminal program click transfer menu select capture txt.
In F3>/1B0,0,200,1.stop capture,and open capture.txt ,find 53 54
2. Set offset address

To find the correct offset address, respectively, fill in the text box in the lower right corner 。click "set" button.
3. Try to get serial sn
If you find the correct offset address, click "get" button ,it will display the correct information.

For wd:
some of the new model HDD, the model on the flash inside。

I don't agree with changing serial numbers as it's connected to fraud most of the time