Hello,
i want to know if is possible to scan usb drives in dos with mhdd.
I know there are many software that can scan drives in dos, but most of them will scan only if the drive is connected via PATA or SATA port.
Some drives have an integrated sata/usb adapter so it's impossible to check those in dos, so is important to make ricognize this usb drive in dos with mhdd.
How can i do?

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Convert to SATA interface and check that way. Or else use Victoria in windows

There are several ways.Techies are getting their USB C Drom, Hard Drives, and other drives to work in DOS. One is using what's known as DUSE driver system. The second method is using what looks somewhat like standard C Drom driver files and a USB driver. Both methods appear to require loading an us baspiX.sys file first in config.sys in most cases. The third method is a bootdisk from a USB vendor.

How do i convert to SATA interface my WD5000BMVU 2,5" hdd?
Look the pcb connection:

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

PCB code is 701635 ?

Try use SATA PCB 701572 (Mercury) and restore ROM from SA.

There's an ISO to burn with MHDD where after installing you can choose running dos with USB drivers.

_________________
data recovery Poland

If you mean "Magic Boot Disk 2.0" i already tried it, but doesn't work for me.
I don't know way

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

So you have to mount USBASPI.SYS

_________________
data recovery Poland

How?

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI