December 28th, 2021, 21:11
December 29th, 2021, 16:48
Boot 0x40M
Servo !supported preamp ID 0000
Spin Up
FAIL Servo Op=0100 Resp=0003
ResponseFrame 02C0 0000 0000 77C0 0008 0000 0000 0000 F100 0000 0000 0000 0000
0000 0000 0000 66C6 FA3B 29C4 CB66 F8BC 192C 1DD9 DFFA 669E 78F3 0000 007F 0000
0000 FFE2 0004 0010
FAIL Servo Op=0100 Resp=0003
ResponseFrame FB40 0000 0000 7840 0008 0000 0000 0000 F07F 0000 0000 0000 0000
0000 0000 0000 66C6 FA3B 29C4 CB66 F8BC 192C 1DD9 DFFA 669E 78F3 0000 007F 0000
0000 FFE0 0004 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame FD80 0000 0000 7840 0008 0000 0000 0000 F07F 0000 0000 0000 0000
0000 0000 0000 66C6 FA3B 29C4 CB66 F8BC 192C 1DD9 DFFA 669E 78F3 0000 007F 0000
0000 FFE0 0004 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame FE40 0000 0000 7800 0008 0000 0000 0000 F0C0 0000 0000 0000 0000
0000 0000 0000 66C6 FA3B 29C4 CB66 F8BC 192C 1DD9 DFFA 669E 78F3 0000 007F 0000
0000 FFE1 0004 0000
January 7th, 2022, 14:57
January 7th, 2022, 15:22
January 8th, 2022, 17:12
pepe wrote:I am wondering about that preamp id message, it should not be 0000.
Is your pcb correctly attached to the HDA?
January 15th, 2022, 15:47
January 15th, 2022, 16:47
January 15th, 2022, 17:19
pepe wrote:I modded the rom so that it might load the old code from the other slot, try this. If it doesn't help, the problem is probably physical.
January 15th, 2022, 17:48
January 15th, 2022, 18:21
pepe wrote:I modded the rom so that it might load the old code from the other slot, try this. If it doesn't help, the problem is probably physical.
fzabkar wrote:I expect that the drive has been updated with the wrong LOD. There is one LOD for 4-head configurations, and another for drives with 5 or 6 heads. I think serial numbers starting with "x24" correspond to 5 heads.
http://www.users.on.net/~fzabkar/HDD/GR-CC4H.TXT
These LODs contain ROM segments as well as 4 SA overlays.
February 11th, 2024, 18:12
egavastm wrote:I contacted HP and they wanted me to RMA my computer. I have no clue if they will post an update.
I got a 2nd ST2000DM001 drive and a serial TTL cable hoping to learn if forcing a firmware update is worth the risk. As you can see below the two drives I have are not comparable.
ST2000DM001-9YN164 HP16 Firmware
--------------------------------
Grenada Luxor 2.1 RAP22 - GR Hda DH, DETCR, 4K Zest
Product FamilyId: 58, MemberId: 04
HDA SN: Z1Exxxxx, RPM: 7199, Wedges: 188, Heads: 4, OrigHeads: A, Lbas: 00001D273EAC, PreampType: CB 16
PCBA SN: 0000xxxxxxxx, Controller: LUXORL_2_1( 202)(FF-FF-FF-FF), Channel: ITERATIVE, PowerAsic: MCKINLEY DESKTOP LITE Rev 15, BufferBytes: 4000000
Package Version: GR753C.HPD1.BK06B8.HP16 , Package P/N: 100707026, Package Global ID: 00188399,
Package Build Date: 04/26/2012, Package Build Time: 10:25:04, Package CFW Version: GR75.HPD1.00446199.00188399,
Package SFW1 Version: C3A7, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 04261025, CustomerRel: HP16, Changelist: 00446199, ProdType: GR75.HPD1, Date: 04/26/2012, Time: 102504, UserId: 00188399
Servo FW Rev: C3A7
RAP FW Implementation Key: 16, Format Rev: 0002, Contents Rev: 61 02 00 00
Features:
- Quadradic Equation AFH enabled
- VBAR with adjustable zone boundaries enabled
- Volume Based Sparing enabled
- IOEDC enabled
- IOECC enabled
- DERP Read Retries enabled v. 3.8.00.0000000000001FF7
- LTTC-UDR2 disabled
ST2000DM001-1CH164 CC26 Firmware
--------------------------------
GrenadaBP LuxorPlus2 4K, GPF1 MC with new serpent DFW
Product FamilyId: 58, MemberId: 04
HDA SN: Z1Fxxxxx, RPM: 7199, Wedges: 188, Heads: 5, OrigHeads: A, Lbas: 00001D273EAC, PreampType: CC 16
Bits/Symbol: C, Symbols/UserSector: BEB, Symbols/SystemSector: 1A5
PCBA SN: 0000xxxxxxxx, Controller: LUXORLPLUS_2_0( 203)(FF-FF-FF-F, Channel: STX_DUNRAVEN, PowerAsic: Unknown Rev 00, BufferBytes: 4000000
Package Version: GPG17C.CCD2.CB0487.CC26 , Package P/N: 100720588, Package Global ID: 00410638,
Package Build Date: 12/13/2012, Package Build Time: 13:56:37, Package CFW Version: GPG1.CCD2.00515436.00410638,
Package SFW1 Version: C7EA, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 12131356, CustomerRel: CC26, Changelist: 00515436, ProdType: GPG1.CCD2, Date: 12/13/2012, Time: 135637, UserId: 00410638
Servo FW Rev: D7EA
TCG IV Version: n/a
Package BPN: 18
RAP FW Implementation Key: 16, Format Rev: 0004, Contents Rev: 71 01 07 00
QNR Container: 1
Features:
- Quadradic Equation AFH enabled
- VBAR with adjustable zone boundaries enabled
- Volume Based Sparing enabled
- IOEDC enabled
- IOECC enabled
- DERP Read Retries enabled v. 4.7.01.0000000000000017
- LTTC-UDR2 enabled
- SuperParity disabled
- Humidity Sensor disabled
- Background Reli Activity Critical Event Logging disabled
February 11th, 2024, 18:58
Powered by phpBB © phpBB Group.