WDR pro 3.0
Posted: March 16th, 2013, 9:20
Is any one using this software for "ROM REGENERATION"? What is your experience?
Page 1 of 1
Re: WDR pro 3.0
Posted: March 18th, 2013, 5:44
WDR pro v6.0 is cooler
Re: WDR pro 3.0
Posted: March 18th, 2013, 11:58
why u are kidding man......
we are only 3 and u r 6, just double........
we are only 3 and u r 6, just double........
Re: WDR pro 3.0
Posted: March 18th, 2013, 13:49
Guess what, someone cracked them and posted them on a russian forum
Yes ironic isn't it?
WDR 6...........well that is the cracked version of WDR 5.3 cough cough
and no I don't have it!Re: WDR pro 3.0
Posted: March 18th, 2013, 15:04
WDMarvel23 http://rghost.net/43013692
As far as I know this one is legitimately for free and is in continuous development and can be followed on the Russian forums. If you have any comments on this one it would be best start new thread.
As far as I know this one is legitimately for free and is in continuous development and can be followed on the Russian forums. If you have any comments on this one it would be best start new thread.
Re: WDR pro 3.0
Posted: March 19th, 2013, 12:02
So, Whether wdr 6.0 actually exists or not? Is it available in russian sites or not?
Re: WDR pro 3.0
Posted: March 20th, 2013, 10:34
But then it should be available in the www web.
Re: WDR pro 3.0
Posted: April 16th, 2013, 2:21
pls i want wd caviar program i have marvel one but not work on caviar hdd
i have wd pro 3 works only on marvel hdd and i have some caviar hdds please if any one have it please send it to me
thanks all
i have wd pro 3 works only on marvel hdd and i have some caviar hdds please if any one have it please send it to me
thanks all
Re: WDR pro 3.0
Posted: May 20th, 2013, 1:15
That link - download is blocked - WDMarvel23 http://rghost.net/43013692
Anyone know a good link where to download the WDR PRO 3.0 or higher version?
thank you!!
Anyone know a good link where to download the WDR PRO 3.0 or higher version?
thank you!!
Re: WDR pro 3.0
Posted: July 11th, 2015, 8:13
Spildit wrote:WDMarvel23 IS NOT WDR.
WDMarvel23 is a diferent tool (Russian) while WDR is chinese "pirated" tool based on TREX and HRT.
WDR DEMO :
http://malthus.zapto.org/viewtopic.php?f=32&t=33
WDR Full is not FREEWARE and it's PIRATED.
WDMarvel23 in russian could be downloaded from that link that now is down and i don't have it. Maybe someone who download it when the site was still up can send you a copy ?
Can I use "Repair" on donor PCB to regenerate ROM?
The original PCB is completely shot and cannot read (embedded) ROM any more.
Re: WDR pro 3.0
Posted: July 14th, 2015, 23:40
Spildit wrote:Automatic function on WDR might not be very reliable.
Use manual method instead :
http://www.hddoracle.com/viewtopic.php?f=59&t=761
Thanks for the tip.
I'm trying to digest the manual method
WDR Demo does not read the SA MOD.
Can you suggest any other tool?
I'm trying to recover data from my personal HDD.
I tried messaging you over at HDD oracle before posting here (last page).
http://malthus.mooo.com/viewtopic.php?f=32&t=84&sid=57df187b8f0257473e6600368b0d0ebb#p7607
Are you no longer active there?
Re: WDR pro 3.0
Posted: July 16th, 2015, 5:48
Spildit wrote:For reading modules you can use a free version of SeDiv for WD.
WDR DEMO doesn't read modules, as stated.
Regarding malthus forum read here :
http://www.hddoracle.com/viewtopic.php?f=56&t=1149
Regards.
No wonder.
I did not see that message.
All SeDiv trials I downloaded have malware detected.
Sediv.exe got zapped by the AV even before I could even open the folder.
Detected malware: UDS:DangerousObject.Multi.Generic
Re: WDR pro 3.0
Posted: September 22nd, 2015, 6:42
Spildit, Hi, would u like 2 ,ve a small chat. i need some guidance & help. my email is aalamcomp@gmail.com
Re: WDR pro 3.0
Posted: October 2nd, 2017, 16:38
nice information
Re: WDR pro 3.0
Posted: January 1st, 2018, 14:32
Is there a similar program for Hitachi?