Dear friends and colleagues,
At your request, we have made a head replacement tool which should "fill in the gap" left in supported Seagate and Maxtor hard drives.
HDDS Sea 7200.9 p1
This head replacement tool is made for safe and easy head replacement on Seagate 7200.9 and Maxtor DiamondMax 20 hard drives with 1 platter.
These hard drives have a similar casing as other 7200.9 hard drives with 2 or 3 platters, but the height on which the platter rests is different. This is why a new tool was needed to support these specific hard drives.
Find more info about this set of tools on our website here:
http://www.hddsurgery.com/tool/hdds-sea-7200-9-p1
You can also find a PDF manual, video guide and animation on these links:
1. Manual - http://www.hddsurgery.com/dl/HDDS_Sea_7200.9_p1.pdf
2. Video Guide - http://www.hddsurgery.com/tool/hdds-sea ... &box=video
3. Animation - http://www.hddsurgery.com/tool/hdds-sea ... =animation
As always, if You have any questions, proposals, or You need any additional information about any of our products, feel free to contact us and we will be glad to help.
