Page 1 of 1
FLASH software recovery
Posted: February 13th, 2014, 17:26
by DaveFLASH
Hi,
I search software for recovery data from dump nands. I have programmer for too many nands and nors. I dont need nand reader.
Re: FLASH software recovery
Posted: February 13th, 2014, 17:52
by lcoughey
PC3K Flash or SoftCentre. You will need their readers in order for the software to work, but if your dumps are good, you should be able to import them into their programs.
Re: FLASH software recovery
Posted: February 13th, 2014, 19:35
by arvika
Standard programmer usually reads nand flash wrong.
Re: FLASH software recovery
Posted: February 14th, 2014, 3:38
by pcimage
arvika wrote:Standard programmer usually reads nand flash wrong.
Yes, you need SA data too. Which contains block numbering, ECC data etc...
Re: FLASH software recovery
Posted: February 14th, 2014, 4:56
by DaveFLASH
I have Wellon VP-996.
I have experience with Salvation Data Flash Doctor, but lot of nands cant to read.
PC3K Flash or SoftCentre which is better?
Re: FLASH software recovery
Posted: February 14th, 2014, 7:16
by HaQue
search the forum as this has been discussed already, and all posts are still relevant.
cheers