| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Raid 0 Recovery with R-studio. Need help?! http://forum.hddguru.com/viewtopic.php?f=7&t=28490 |
Page 1 of 1 |
| Author: | Psymon [ April 28th, 2014, 9:28 ] | ||
| Post subject: | Raid 0 Recovery with R-studio. Need help?! | ||
Hi everyone!. while im trying to recover my files with r-studio, at the beginning of scaning, this errors appear. (image attached below) i m trying to recover my files from images of 2 hard drives that are stripped together with (raid 0). by accident I broke the Raid0 array. what mistake am I making while recovering that ı am geting these error messages. thank you
|
|||
| Author: | lcoughey [ April 28th, 2014, 9:33 ] |
| Post subject: | Re: Raid 0 Recovery with R-studio. Need help?! |
Striped together with what? What was the block size? Do you have the images in the correct order? |
|
| Author: | Psymon [ April 28th, 2014, 10:16 ] | ||
| Post subject: | Re: Raid 0 Recovery with R-studio. Need help?! | ||
by accident I broke the Raid0 array from raid setup that starts with ctrl+f before windows starts. after that when system boots up i realise what i did  when I striped the two discs with raid0 I used setup defaults and changed nothing. After accidentally separating the two harddiscs I used virtual raid (R studio). when I scan with r studio I was getting the same errors I just posted before doing anything I made images of the backups of separeted harddisks. Then I stiped together the two harddiscs from raid setup (before windows boot with ctrl+F) and tried again and still the same errors appear. Each time I am able to see the content of the data but cannot play the files. WE ARE TRYING TO SAVE MOVIES WITH LARGE FILES Image is attached
|
|||
| Author: | lcoughey [ April 28th, 2014, 10:23 ] |
| Post subject: | Re: Raid 0 Recovery with R-studio. Need help?! |
I'd be happy to assist remotely, for a fee, of course. You will find my contact details via a PM. |
|
| Author: | Psymon [ April 28th, 2014, 10:43 ] |
| Post subject: | Re: Raid 0 Recovery with R-studio. Need help?! |
By the way I live in Turkey. Will you still be able to help me.? |
|
| Author: | lcoughey [ April 28th, 2014, 11:05 ] |
| Post subject: | Re: Raid 0 Recovery with R-studio. Need help?! |
Psymon wrote: By the way I live in Turkey. Will you still be able to help me.? Of course. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|