Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
zio_mangrovia
 Post subject: wdr
PostPosted: August 30th, 2014, 5:32 
Offline

Joined: August 7th, 2014, 10:04
Posts: 40
Location: Leghorn, Italy
WDR return this error while I'm reading firmware: unknown error BE01.
what means?
Top
 Profile  
 
zio_mangrovia
 Post subject: Re: wdr
PostPosted: August 30th, 2014, 10:34 
Offline

Joined: August 7th, 2014, 10:04
Posts: 40
Location: Leghorn, Italy
If replace new donor pcb into hdd and I set jumper into safe mode, war gives me this msg while I'm reading rom:
read flash - FFFF=NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG

but file downloaded is 0 KB!

I can make write flash, with these 2 msg:

erase flash: ... NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG
write flash: ... NOT_AN_ERR_VSC_CMD_EXEC_IN_BKG
but I get again 0 KB file
Top
 Profile  
 
zio_mangrovia
 Post subject: Re: wdr
PostPosted: August 30th, 2014, 12:06 
Offline

Joined: August 7th, 2014, 10:04
Posts: 40
Location: Leghorn, Italy
I replaced pcb and rewritten original rom on pcb but hdd is always detected as 0 size from bios
suggestions? Someone told me to rebuild 4f module
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group