Hello everyone,

It's the first time I'm using MHDD on a real computer, whitout taking out the HDD, and when I'm trying to scan my disk (from a DOS USB-Key) I have the message : "This drive does not support LBA mode or not detected."

What I don't get is that everything is blue (DRDY etc..), or it seems like, because the top left of my screen is bit.... Well, I can't see throught

If anybody has an idea,

Thanks for stopping by,

Symi

Hi there!

Did you select the correct drive to scan ?

Can you see a menu with the list of connected drives to the PC ?

Are the drives working OK or do you have a possible defective (non-working) drive connected to the port you are attempting to scan ?

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

Well, I tried every of the ports because none had a name who allowed me to guess wether it was my disk or not.

My drive works, I just wanted to see if it was ok or if I would need to replace it, because lately I was feeling it was a bit lower than before.

Thanks for your help

Are your drives connected directly to the motherbaord by SATA/PATA port ? Or are you using a RAID card, USB drives, etc ?

If you are using a 3rd party card to plug the drives in then MHDD might not be able to pick it up because of lack of driveres, and also using MHDD on a redundant RAID array is pointless, you should test drive by drive by plugging it directly to SATA.

Also are you booting MHDD from PURE DOS by the use of a DOS boot disk or something like hirens boot cd ?

MHDD doesn't work from windows, you need to run it from pure dos.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

My drive is directly connected by a SATA port to the motherboard.

I'm using a bootable usb key, whiche is emulating a DOS environment. I made it emulating a floppy disk.

Actually, I'm afraid that the disk isn't started yet because I tried other softwares from a CD and they were unable to see my disk.
But what I don't get is why then DRDY would be in blue ? It should be red if the soft is unable to see the disk, shouldn't it ?

THanks again !

I would try temporarily reconfiguring your SATA controller in your BIOS for legacy or IDE compatibility mode. This will make your drive look like PATA.

As for your problems at "the top left of my screen", is this something to do with the screen being in different modes for DOS and Windows/Linux? If so, does your monitor have an "auto" button to align the display?

_________________
A backup a day keeps DR away.

fzabkar : I'll try this tomorrow, thanks. And my screen's problem is actually a leak of liquid crystals :/

If your display allows it, try adjusting the horizontal/vertical positions in the geometry settings.

_________________
A backup a day keeps DR away.