January 26th, 2020, 19:14
February 2nd, 2020, 18:39
February 2nd, 2020, 19:12
“In any case, thank you again for the fantastic work. I also use RapidSpar, but it very often fails. As in this case. Thanks a lot.”
February 2nd, 2020, 22:17
maximus wrote:So I released this new version late at night, and before I posted here late today someone had upgraded to this version and found the reset processing change was a useful improvement. Probably the only reason I know is they had a question and emailed me. But that is not the point of this post. Along with the report of better program operation and question, they also said this:“In any case, thank you again for the fantastic work. I also use RapidSpar, but it very often fails. As in this case. Thanks a lot.”
So someone is using HDDSuperClone Pro to handle a job that RapidSpar fails at. I think I am going to bask in this thought for awhile. Someone is using my $200 software to handle a job that a $2000 hardware tool fails at. I will try not to let this go to my head too bad… (too late)
February 8th, 2020, 13:35
February 17th, 2020, 9:57
March 1st, 2020, 14:21
March 2nd, 2020, 12:45
March 3rd, 2020, 19:22
alfarom wrote:Just downloaded and installed the latest update.
I'm working my way through the videos at the moment. They are really helpful. One thing. You seem to prefer DMDE over R-Studio for data extraction now. What advantages does it give over R-Studio. Also, have you tried just using DMDE without HDDSuperClone first to compare the recovery success for each?
Thanks...
March 3rd, 2020, 19:38
alfarom wrote:Just downloaded and installed the latest update.
I'm working my way through the videos at the moment. They are really helpful. One thing. You seem to prefer DMDE over R-Studio for data extraction now. What advantages does it give over R-Studio. Also, have you tried just using DMDE without HDDSuperClone first to compare the recovery success for each?
Thanks...
March 4th, 2020, 8:49
March 6th, 2020, 12:21
June 24th, 2020, 0:05
June 24th, 2020, 8:30
June 24th, 2020, 15:46
June 24th, 2020, 17:45
mich82 wrote:Excellent Update!! ..Hope you will add Firmware Repair Tool in Pro' version in the future Updates.
June 25th, 2020, 0:44
maximus wrote:mich82 wrote:Excellent Update!! ..Hope you will add Firmware Repair Tool in Pro' version in the future Updates.
Thanks. But firmware repair tools are not planned. If you knew how complicated that can be, then you would understand how much more you should appreciate the pro tools that are capable of such firmware repairs, and also the pros that can do it without tools.
June 25th, 2020, 22:11
mich82 wrote:maximus wrote:mich82 wrote:Excellent Update!! ..Hope you will add Firmware Repair Tool in Pro' version in the future Updates.
Thanks. But firmware repair tools are not planned. If you knew how complicated that can be, then you would understand how much more you should appreciate the pro tools that are capable of such firmware repairs, and also the pros that can do it without tools.
Thanks, is HDDSuperClone Pro and Sediv Repair tool good enough for all round data recovery without any hardware tools?
June 26th, 2020, 8:00
July 30th, 2020, 11:31
maximus wrote:I would like to introduce HDDSuperClone, a new advanced Linux based hard drive cloning/imaging tool. The current free version is comparable to gnu ddrescue, and should actually be better in some ways. Please visit the home page for more information.
http://www.sdcomputingservice.com/hddsuperclone
Powered by phpBB © phpBB Group.