HDD GURU FORUMS
http://forum.hddguru.com/

Donor HDD Seagate ST1000LX015
http://forum.hddguru.com/viewtopic.php?f=7&t=39809		 Page 1 of 1
Author:  sigitharjono [ May 1st, 2020, 8:26 ]
Post subject:  Donor HDD Seagate ST1000LX015
Hey guys, i want to ask some questions

I have HDD Segate Firecuda 1TB, but this hdd don't detect on computer. I want to try change the PCB, my question is what is the requirement for the donor hdd? (e.g it must have the same firmware or something like that).

And after i get the donor what should i exchange from hdd patient to donor? Maybe i should change the ROM? And where is the location of the ROM?

Attachments:
File comment: The PCB
WhatsApp Image 2020-05-01 at 18.59.57.jpeg
WhatsApp Image 2020-05-01 at 18.59.57.jpeg [ 95.7 KiB | Viewed 10102 times ]
File comment: The label
WhatsApp Image 2020-05-01 at 18.59.58.jpeg
WhatsApp Image 2020-05-01 at 18.59.58.jpeg [ 104.69 KiB | Viewed 10102 times ]
Author:  Amarbir[CDR-Labs] [ May 1st, 2020, 8:57 ]
Post subject:  Re: Donor HDD Seagate ST1000LX015
Well,
This has a NAND Chip And Replacing This is Not a Easy TASK ,Give This Job To Some Person Who Knows This Its Not a Replace ROM Kinda Job
Author:  sigitharjono [ May 1st, 2020, 10:19 ]
Post subject:  Re: Donor HDD Seagate ST1000LX015
Mr. Amarbir[CDR-Labs]

Thank you very much for the information
Author:  MindMergepk [ May 1st, 2020, 11:34 ]
Post subject:  Re: Donor HDD Seagate ST1000LX015
what if the PCB is not a problem ?
need to diagnose properly before doing anything, NAND part is mostly a problem on SSHD drives.

better to send someone with proper tool and knowledge.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/