HDD GURU FORUMS http://forum.hddguru.com/ |
|
SAMSUNG ATA PASSWORD http://forum.hddguru.com/viewtopic.php?f=7&t=40223 |
Page 1 of 1 |
Author: | LarrySm0z [ July 31st, 2020, 6:50 ] |
Post subject: | SAMSUNG ATA PASSWORD |
Hello, sorry if I posted in the wrong place. My hard disk is now in an external enclosure and victoria software says This drive locked by ATA password! Below is the details displayed on victoria. Is there any way I can remove the password without spending $$$$. I am sure there is a procedure I can follow.... Thanks in Advance! |
Author: | Setlec [ August 1st, 2020, 5:26 ] |
Post subject: | Re: SAMSUNG ATA PASSWORD |
there is nothing displayed. |
Author: | BGman [ August 1st, 2020, 8:41 ] |
Post subject: | Re: SAMSUNG ATA PASSWORD |
LarrySm0z wrote: I am sure there is a procedure I can follow.... 1. Send SuperOn command 2. Send "Clear PWD" command 3. Power Off/On |
Author: | ErikMares10 [ September 4th, 2020, 16:19 ] |
Post subject: | Re: SAMSUNG ATA PASSWORD |
BGman wrote: LarrySm0z wrote: I am sure there is a procedure I can follow.... 1. Send SuperOn command 2. Send "Clear PWD" command 3. Power Off/On i have the same problem, with a toshiba hdd, the victoria program says This drive locked by ATA password! How can I enter those commands you mention? |
Author: | BGman [ September 17th, 2020, 11:03 ] |
Post subject: | Re: SAMSUNG ATA PASSWORD |
ErikMares10 wrote: How can I enter those commands you mention? Wrong question. |
Author: | fzabkar [ September 17th, 2020, 14:46 ] |
Post subject: | Re: SAMSUNG ATA PASSWORD |
Try ZU: http://www.hddoracle.com/viewtopic.php?f=95&t=812 |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |