Page 1 of 1

SAMSUNG ATA PASSWORD

Posted: July 31st, 2020, 6:50
by LarrySm0z
Hello, sorry if I posted in the wrong place.

My hard disk is now in an external enclosure and victoria software says This drive locked by ATA password!
Below is the details displayed on victoria. Is there any way I can remove the password without spending $$$$.

I am sure there is a procedure I can follow....
Thanks in Advance!

Re: SAMSUNG ATA PASSWORD

Posted: August 1st, 2020, 5:26
by Setlec
there is nothing displayed.

Re: SAMSUNG ATA PASSWORD

Posted: August 1st, 2020, 8:41
by BGman
LarrySm0z wrote:I am sure there is a procedure I can follow....


1. Send SuperOn command
2. Send "Clear PWD" command
3. Power Off/On

Re: SAMSUNG ATA PASSWORD

Posted: September 4th, 2020, 16:19
by ErikMares10
BGman wrote:
LarrySm0z wrote:I am sure there is a procedure I can follow....


1. Send SuperOn command
2. Send "Clear PWD" command
3. Power Off/On

i have the same problem, with a toshiba hdd, the victoria program says This drive locked by ATA password! How can I enter those commands you mention?

Re: SAMSUNG ATA PASSWORD

Posted: September 17th, 2020, 11:03
by BGman
ErikMares10 wrote: How can I enter those commands you mention?


Wrong question.

Re: SAMSUNG ATA PASSWORD

Posted: September 17th, 2020, 14:46
by fzabkar