| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| how to use an external HDD USB port in DOS mode with MHDD http://forum.hddguru.com/viewtopic.php?f=7&t=42803 |
Page 1 of 1 |
| Author: | tingotech [ October 17th, 2022, 17:27 ] |
| Post subject: | how to use an external HDD USB port in DOS mode with MHDD |
I want to use MHDD in USB boot for an external HDD USB Toshiba. I need to recover bad sectors. Do you have any idea how to do it? I read about Magic Boot Disk but can't boot on USB. ACtually MHDD only read SATA ports, not USB, please I need help |
|
| Author: | Arch Stanton [ October 17th, 2022, 19:26 ] |
| Post subject: | Re: how to use an external HDD USB port in DOS mode with MHD |
What do you mean 'recover bad sectors'? You mean repair them? Or need to recover data? If repair then forget it, get a new one. If you need to recover data then cloning is a better route (ddrescue, hddsuperclone). |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|