MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 4
  [ 66 posts ]  Go to page 1, 2, 3, 4  Next
  Print view Previous topic | Next topic 
Author Message
aekhv
 Post subject: MiniNVMe and MiniAHCI kernel modules for Linux
PostPosted: September 24th, 2024, 8:07 
Offline
User avatar

Joined: September 11th, 2024, 10:21
Posts: 64
Location: Russia
Hi. Last months I working on interesting project, actually it's a simple disk clone software under the Linux operating system. The main idea is replacing standard NVMe/AHCI drivers to my custom drivers: MiniNVMe and MiniAHCI. As result attached devices will be isolated from the operating system: no mount attempt, no SMART status reading etc. The only way to get access to device is my application. In simple terms - like PC-3000 works.

Whats is I have at this moment? MiniNVMe driver reads some PCI-E (NVMe) device info: PCI id's, link speed, NVMe subsystem version etc. Also PCI-E hot plug supported. Yes, it's not a joke. As you know maybe, PCI-E hot plug supported by the Linux kernel, but to get it work this feature must be also supported by chipset hardware. Not all of the modern PC motherboards support PCI-E hot plug. To control the device's power supply I use a simple CH340 USB relay.

How it looks now?

Attachment:
2024-09-24 21-06-39.png
2024-09-24 21-06-39.png [ 174.68 KiB | Viewed 65653 times ]

Attachment:
2024-09-24 17-48-45 11.JPG
2024-09-24 17-48-45 11.JPG [ 722.63 KiB | Viewed 65653 times ]

Attachment:
2024-09-24 17-49-48 11.JPG
2024-09-24 17-49-48 11.JPG [ 609.2 KiB | Viewed 65653 times ]

Attachment:
2024-09-24 17-53-00 11.JPG
2024-09-24 17-53-00 11.JPG [ 458.63 KiB | Viewed 65653 times ]


From time to time I plan to post some news about the project. Not too often I guess. So stay tuned and please share your thoughts below.
Top
 Profile  
 
Arch Stanton
 Post subject: Re: Another useless data recovery toy?
PostPosted: September 26th, 2024, 5:57 
Offline
User avatar

Joined: May 13th, 2019, 7:50
Posts: 1156
Location: Nederland
Oh wow ..

_________________
Joep - http://www.disktuna.com - video & photo repair & recovery service
Top
 Profile  
 
lcoughey
 Post subject: Re: Another useless data recovery toy?
PostPosted: September 27th, 2024, 9:59 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2577
Location: Ontario, Canada
following.

_________________
Luke
Recovery Force Donor Inventory: 5,000+ Fully Cataloged HDDs & Growing
Top
 Profile  
 
aekhv
 Post subject: Re: Another useless data recovery toy?
PostPosted: October 2nd, 2024, 9:16 
Offline
User avatar

Joined: September 11th, 2024, 10:21
Posts: 64
Location: Russia
Now MiniNVMe driver is able to receive device identification data: model name, firmware revision, serial number, capacity etc. The next step is sectors reading and writing.

Attachment:
2024-10-02 23-08-13.png
2024-10-02 23-08-13.png [ 77.33 KiB | Viewed 64769 times ]


Top
 Profile  
 
northwind
 Post subject: Re: Another useless data recovery toy?
PostPosted: October 4th, 2024, 3:20 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3548
Location: Greece
Very impressive.
I'm following as well.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
pclab
 Post subject: Re: Another useless data recovery toy?
PostPosted: October 9th, 2024, 3:37 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal
Maybe not that useless :mrgreen:

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
aekhv
 Post subject: Re: Another useless data recovery toy?
PostPosted: October 17th, 2024, 8:48 
Offline
User avatar

Joined: September 11th, 2024, 10:21
Posts: 64
Location: Russia
Data transfer is working: read & write.
Attachment:
2024-10-17 22-26-30.png
2024-10-17 22-26-30.png [ 203.67 KiB | Viewed 63480 times ]

At this moment my driver does not support software reset sequence. If a patient device does not response (slow responding, firmware background activity, bad block occurred, etc.) the only way to reset it is power replug. I guess in case when mainboard supports PCI-E hot plug it's more than enough.
Top
 Profile  
 
aekhv
 Post subject: Re: Another useless data recovery toy?
PostPosted: October 21st, 2024, 10:32 
Offline
User avatar

Joined: September 11th, 2024, 10:21
Posts: 64
Location: Russia
I got a couple of interesting digits: an average read speed from two different devices.
    1. Totally trimmed drive (no real data, returns zeroes only) - 2235.9 MB/ses
    2. Formatted drive, some files dropped - 364.0 MB/sec

Not bad I guess. Especially for self written NVMe device driver for Linux. What do you think?

Attachment:
2024-10-21 23-38-36.png
2024-10-21 23-38-36.png [ 21.16 KiB | Viewed 62631 times ]

Attachment:
2024-10-21 23-47-31.png
2024-10-21 23-47-31.png [ 22.77 KiB | Viewed 62631 times ]


Top
 Profile  
 
aekhv
 Post subject: Re: Another useless data recovery toy?
PostPosted: October 24th, 2024, 8:17 
Offline
User avatar

Joined: September 11th, 2024, 10:21
Posts: 64
Location: Russia
NVMe error codes description in process...
Attachment:
2024-10-24 22-12-13.png
2024-10-24 22-12-13.png [ 119.64 KiB | Viewed 62271 times ]


Top
 Profile  
 
Arch Stanton
 Post subject: Re: Another useless data recovery toy?
PostPosted: October 24th, 2024, 8:44 
Offline
User avatar

Joined: May 13th, 2019, 7:50
Posts: 1156
Location: Nederland
aekhv wrote:
NVMe error codes description in process...
Attachment:
2024-10-24 22-12-13.png


Those errors do ring a bell ;)

https://www.disktuna.com/decoding-statu ... mart-logs/

_________________
Joep - http://www.disktuna.com - video & photo repair & recovery service
Top
 Profile  
 
Setlec
 Post subject: Re: Another useless data recovery toy?
PostPosted: October 26th, 2024, 17:37 
Offline
User avatar

Joined: May 29th, 2020, 19:08
Posts: 109
Location: Tunisia
Wow this is truly becoming a very interesting tool. Following too.

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch
Top
 Profile  
 
aekhv
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 21st, 2024, 6:51 
Offline
User avatar

Joined: September 11th, 2024, 10:21
Posts: 64
Location: Russia
Now health info looks like you know what... Ehe-he-he... 8)
Attachment:
2024-11-21 20-46-04.png
2024-11-21 20-46-04.png [ 218.6 KiB | Viewed 61278 times ]


Code:
    QNvmeBlockDevice nvme;

    if (!nvme.open("/dev/mininvme0")) {
        ui->plainTextEdit->appendPlainText("Device opening error!");
        return;
    }

    ui->plainTextEdit->appendPlainText("Device /dev/mininvme0 opened...\n");

    QNvmeControllerInfo info = nvme.controllerInfo();
    ui->plainTextEdit->appendPlainText("Model: " + info.modelName());
    ui->plainTextEdit->appendPlainText("Firmware: " + info.firmwareRevision());
    ui->plainTextEdit->appendPlainText("Serial number: " + info.serialNumber());
    ui->plainTextEdit->appendPlainText(QString("Capacity: %1 GB")
                                       .arg(info.totalCapacity() / (1000.0 * 1000.0 * 1000.0), 0, 'f', 1));

    QNvmeLogPageHealthInfo health = nvme.logPageHealthInfo();
    if (!nvme.lastError().success()) {
        ui->plainTextEdit->appendPlainText("Health reading errror!");
        return;
    }

    ui->plainTextEdit->appendPlainText("\n*** HEALTH INFO ***\n");
    ui->plainTextEdit->appendPlainText(QString("Composite temperature: %1 °C")
                                       .arg(health.compositeTemperature() - 273));
    ui->plainTextEdit->appendPlainText(QString("Available spare: %1 %")
                                       .arg(health.availableSpare()));
    ui->plainTextEdit->appendPlainText(QString("Available spare threshold: %1 %")
                                       .arg(health.availableSpareThreshold()));
    ui->plainTextEdit->appendPlainText(QString("Percentage used: %1 %")
                                       .arg(health.percentageUsed()));
    ui->plainTextEdit->appendPlainText(QString("Data units read: %1 (%2 GiB)")
                                       .arg(health.dataUnitsRead()).arg(health.dataUnitsRead() * 512 / (1024 * 1024)));
    ui->plainTextEdit->appendPlainText(QString("Data units written: %1 (%2 GiB)")
                                       .arg(health.dataUnitsWritten()).arg(health.dataUnitsWritten() * 512 / (1024 * 1024)));
    ui->plainTextEdit->appendPlainText(QString("Host read commands: %1")
                                       .arg(health.hostReadCommands()));
    ui->plainTextEdit->appendPlainText(QString("Host write commands: %1")
                                       .arg(health.hostWriteCommands()));
    ui->plainTextEdit->appendPlainText(QString("Controller busy time: %1 m")
                                       .arg(health.controllerBusyTime()));
    ui->plainTextEdit->appendPlainText(QString("Power cycles: %1")
                                       .arg(health.powerCycles()));
    ui->plainTextEdit->appendPlainText(QString("Power on hours: %1")
                                       .arg(health.powerOnHours()));
    ui->plainTextEdit->appendPlainText(QString("Unsafe shutdowns: %1")
                                       .arg(health.unsafeShutdowns()));
    ui->plainTextEdit->appendPlainText(QString("Media and data integrity errors: %1")
                                       .arg(health.mediaAndDataIntegrityErrors()));
    ui->plainTextEdit->appendPlainText(QString("Number of error information log entries: %1")
                                       .arg(health.numberOfErrorInformationLogEntries()));
    ui->plainTextEdit->appendPlainText(QString("Warning composite temperature time: %1 m")
                                       .arg(health.warningCompositeTemperatureTime()));
    ui->plainTextEdit->appendPlainText(QString("Critical composite temperature time: %1 m")
                                       .arg(health.criticalCompositeTemperatureTime()));
    int n = 0;
    foreach (int t, health.temperatureSensors()) {
        n++;
        if (t != 0)
            ui->plainTextEdit->appendPlainText(QString("Temperature sensor #%1: %2 °C").arg(n).arg(t - 273));
        else
            ui->plainTextEdit->appendPlainText(QString("Temperature sensor #%1: no sensor").arg(n));
    }
    ui->plainTextEdit->appendPlainText(QString("Thermal management temperature 1 transition count: %1")
                                       .arg(health.TMT1TransitionCount()));
    ui->plainTextEdit->appendPlainText(QString("Thermal management temperature 2 transition count: %1")
                                       .arg(health.TMT2TransitionCount()));
    ui->plainTextEdit->appendPlainText(QString("Total time for thermal management temperature 1: %1 s")
                                       .arg(health.totalTimeForTMT1()));
    ui->plainTextEdit->appendPlainText(QString("Total time for thermal management temperature 2: %1 s")
                                       .arg(health.totalTimeForTMT2()));
Top
 Profile  
 
Lardman
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 21st, 2024, 7:13 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1295
Location: United Kingdom
Looking good so far.

Would love to see the drive itself on a fly lead outside the case though and positioned so we can get at both sides whilst it's running.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/
Top
 Profile  
 
fzabkar
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 21st, 2024, 15:06 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17042
Location: Australia
Where is the health.criticalWarning attribute?

This is wrong:

Code:
    ui->plainTextEdit->appendPlainText(QString("Data units read: %1 (%2 GiB)")
                                       .arg(health.dataUnitsRead()).arg(health.dataUnitsRead() * 512 / (1024 * 1024)));
    ui->plainTextEdit->appendPlainText(QString("Data units written: %1 (%2 GiB)")
                                       .arg(health.dataUnitsWritten()).arg(health.dataUnitsWritten() * 512 / (1024 * 1024)));

It should be ...

Code:
    ui->plainTextEdit->appendPlainText(QString("Data units read: %1 (%2 GiB)")
                                       .arg(health.dataUnitsRead()).arg(health.dataUnitsRead() * 512 * 1000 / (1024 * 1024 * 1024)));
    ui->plainTextEdit->appendPlainText(QString("Data units written: %1 (%2 GiB)")
                                       .arg(health.dataUnitsWritten()).arg(health.dataUnitsWritten() * 512 * 1000 / (1024 * 1024 * 1024)));

Quote:
Data Units Read: Contains the number of 512 byte data units the host has read from the controller; this value does not include metadata. This value is reported in thousands (i.e., a value of 1 corresponds to 1,000 units of 512 bytes read) and is rounded up (e.g., one indicates the that number of 512 byte data units read is from 1 to 1,000, three indicates that the number of 512 byte data units read is from 2,001 to 3,000). When the LBA size is a value other than 512 bytes, the controller shall convert the amount of data read to 512 byte units.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
fzabkar
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 21st, 2024, 16:23 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17042
Location: Australia
Lardman wrote:
Would love to see the drive itself on a fly lead outside the case though and positioned so we can get at both sides whilst it's running.

Something like this?

https://forum.hddguru.com/viewtopic.php?p=264481#p264481

_________________
A backup a day keeps DR away.
Top
 Profile  
 
aekhv
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 21st, 2024, 23:27 
Offline
User avatar

Joined: September 11th, 2024, 10:21
Posts: 64
Location: Russia
fzabkar wrote:
Where is the health.criticalWarning attribute?

Oops, forgot to add...

fzabkar wrote:
This is wrong

Yes, I know. I was just curious why the PC-3000 also shows these attributes incorrectly. Obviously this is a mistake.
Top
 Profile  
 
fzabkar
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 22nd, 2024, 1:18 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17042
Location: Australia
aekhv wrote:
fzabkar wrote:
This is wrong

Yes, I know. I was just curious why the PC-3000 also shows these attributes incorrectly. Obviously this is a mistake.

PC3000 is correct. You are wrong.

https://www.google.com/search?q=0x0a333b+x+512+x+1000+bytes+in+GiB

    0x0a333b x 512 x 1000 bytes = 318.753719 gibibytes

https://www.google.com/search?q=0x09510f+x+512+x+1000+bytes+in+GiB

    0x09510f x 512 x 1000 bytes = 291.144848 gibibytes

_________________
A backup a day keeps DR away.
Top
 Profile  
 
aekhv
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 22nd, 2024, 4:29 
Offline
User avatar

Joined: September 11th, 2024, 10:21
Posts: 64
Location: Russia
fzabkar wrote:
PC3000 is correct. You are wrong.

Yeah, it's true. Thanks a lot!
Top
 Profile  
 
Lardman
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 22nd, 2024, 5:40 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1295
Location: United Kingdom
fzabkar wrote:
Something like this?

https://forum.hddguru.com/viewtopic.php?p=264481#p264481
More like this https://www.aliexpress.com/item/1005006584734868.html but with the rest of the m2 mounting pcb snapped right back or the the m2 mounted vertically.

We need something that has the drive pcb clear so we can get to both sides and that we can put on an external heater or cooler.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/
Top
 Profile  
 
fzabkar
 Post subject: Re: Another useless data recovery toy?
PostPosted: November 22nd, 2024, 14:43 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17042
Location: Australia
Lardman wrote:
fzabkar wrote:
Something like this?

https://forum.hddguru.com/viewtopic.php?p=264481#p264481
More like this https://www.aliexpress.com/item/1005006584734868.html but with the rest of the m2 mounting pcb snapped right back or the the m2 mounted vertically.

We need something that has the drive pcb clear so we can get to both sides and that we can put on an external heater or cooler.

I'd be wondering about the impedance of the ribbon cable. Mismatches in the impedance would degrade the signal.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 4
  [ 66 posts ]  Go to page 1, 2, 3, 4  Next

Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 12 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group