| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Only Victoria shows G-Sensor Count 2, other softwares do not http://forum.hddguru.com/viewtopic.php?f=7&t=44911 |
Page 1 of 1 |
| Author: | Pandemicc [ December 3rd, 2024, 2:48 ] |
| Post subject: | Only Victoria shows G-Sensor Count 2, other softwares do not |
Hi, I bought 22tb toshiba MG two days ago. SMART looked good and decided to use it. After writing around 4tb data to it I decided to run some tests, either HDDscan or Victoria. I was about to start one of the tests and just wanted to check SMART values on Victoria and saw that the status turned to Unideal and the G-Sensor shock counter is now 2. I checked in CrystalDiskInfo and everything looks good there, I also have RTT T80 also wanted to check there and it shows nothing wrong as well. I am very confused, what do you think that I should do? Here are the screenshots. The disk has no partitions currently and also please disregard the temprature it is currently on read test in Victoria. https://imgur.com/a/ToQUYqi |
|
| Author: | fzabkar [ December 3rd, 2024, 14:04 ] |
| Post subject: | Re: Only Victoria shows G-Sensor Count 2, other softwares do |
The raw value is 2 for all 3 tools. |
|
| Author: | Pandemicc [ December 3rd, 2024, 14:07 ] |
| Post subject: | Re: Only Victoria shows G-Sensor Count 2, other softwares do |
fzabkar wrote: The raw value is 2 for all 3 tools. I see, but they do not warn me like Victoria do, strange... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|