HDD GURU FORUMS
http://forum.hddguru.com/

I’ve written a tool, and I also have a question regarding ho
http://forum.hddguru.com/viewtopic.php?f=7&t=46395		 Page 1 of 1
Author:  hwfix888 [ November 4th, 2026, 10:41 ]
Post subject:  I’ve written a tool, and I also have a question regarding ho
I’ve developed a tool—you can find it on the Microsoft Store by searching for "Quiet Linux Reader." It has now been updated to its second version; it allows you to read certain Linux disk formats within Windows, recognize Btrfs data, and export files for free.
I have recently purchased some MRT Lab equipment and have run into an issue. I have two older Samsung hard drives that feature a row of four vertical pins; I am unsure how to connect them to establish communication with the software. Could you please provide some guidance? Thank you.
Author:  skinbob [ November 5th, 2026, 5:50 ]
Post subject:  Re: I’ve written a tool, and I also have a question regardin
Image

Just like that.
Author:  hwfix888 [ November 5th, 2026, 7:12 ]
Post subject:  Re: I’ve written a tool, and I also have a question regardin
skinbob, Thanks for your reply. However, the circuit board you’ve shown appears to be from a Seagate drive, not a Samsung one. The Samsung circuit board I have here only has two pins.
Author:  skinbob [ November 5th, 2026, 9:36 ]
Post subject:  Re: I’ve written a tool, and I also have a question regardin
That should be even easier then, one pin will be TX and the other is RX.
Author:  fzabkar [ November 5th, 2026, 10:44 ]
Post subject:  Re: I’ve written a tool, and I also have a question regardin
How to connect a terminal adaptor on a Samsung drive ?

https://www.hddoracle.com/viewtopic.php?p=432#p432
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/