rameez wrote:
read the ata command manual present on the main of hdd guru .
that might help u alot
that might help u alot
i know all that..
Working on SA now..
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Refrences for f/w Read .write. http://forum.hddguru.com/viewtopic.php?f=7&t=6214 |
Page 1 of 1 |
| Author: | friend [ September 15th, 2006, 4:01 ] |
| Post subject: | Refrences for f/w Read .write. |
hi all , I write many utilities Like (erase hdd,Data recovery,and many small for hardware for Selfporpose).. I am in this field for many years and see many software for f/w read write .. Now i am Doing Research on f/w read write operation(internal procedure and command) of hdds.. Can Anybody want to help me by send this type of material help me in writting a good Software..? Any help is very much apreceted. Thanks |
|
| Author: | rameez [ September 17th, 2006, 4:43 ] |
| Post subject: | |
read the ata command manual present on the main of hdd guru . that might help u alot |
|
| Author: | friend [ September 19th, 2006, 9:24 ] |
| Post subject: | |
rameez wrote: read the ata command manual present on the main of hdd guru .
that might help u alot i know all that..
Working on SA now..
|
|
| Author: | arfaizy13 [ September 20th, 2006, 7:06 ] |
| Post subject: | |
so use PC3000 for fw read / write... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|