HDD GURU FORUMS
http://forum.hddguru.com/

Where is Spildit?
http://forum.hddguru.com/viewtopic.php?f=9&t=30183
Page 1 of 1

Author:  pikus_09 [ December 18th, 2014, 14:55 ]
Post subject:  Where is Spildit?

For some time, since I look forum, I do not see the User Spildit. Where is he !?

Author:  Spildit [ December 23rd, 2014, 18:26 ]
Post subject:  Re: Where is Spildit?

I'm here :)
lol

Author:  pikus_09 [ December 23rd, 2014, 19:18 ]
Post subject:  Re: Where is Spildit?

Heh, Ok but do not you give anything to topics related to the hdd, nothing deathly silence I personally think that you have no interest in this forum. sorry for my english.

Author:  HaQue [ December 23rd, 2014, 21:02 ]
Post subject:  Re: Where is Spildit?

amusing.. 93 posts compared to 4355 ;-)

Author:  LarrySabo [ December 23rd, 2014, 21:15 ]
Post subject:  Re: Where is Spildit?

I took it to be saying, "We don't hear from you any more Spildit; have you lost your interest in hard drives?"

Author:  HaQue [ December 24th, 2014, 0:22 ]
Post subject:  Re: Where is Spildit?

Yes, I was being fececious, but also, if you look at the facts:
1.He has his own forum
2. He has had a few life things mentioned and has had to spend less time on forums a couple of times, so an ebb and flow is not unusual.
3. he has started to learn enough to make some money out of this.. means that the free help will decline because of a shift of dedicated time.
4. If you have learnt anything from Spildit, you would seriously doubt he would lose interest in HDD's ;-)

Author:  pikus_09 [ December 24th, 2014, 7:57 ]
Post subject:  Re: Where is Spildit?

Ok so what now? Spildit colleague voluntarily cease to help the poor and needy come selfless help to the remote? sorry for my english.

Author:  HaQue [ December 24th, 2014, 8:24 ]
Post subject:  Re: Where is Spildit?

wow, you are assuming a lot there buddy. Remember this forum is an open forum where people volunteer help, or ask questions, come and go as they please. Nobody is under any obligation to do anything except be respectful to other members.. and their past behaviour should not be a shackle to bind them to any future action.

Best you PM Spildit and chat, he is a reasonable sounding guy and I am sure if your tact was ok he would have a conversation with you.

Author:  pikus_09 [ December 24th, 2014, 9:40 ]
Post subject:  Re: Where is Spildit?

yes, i understand.
I hope it will be fine.

Author:  Spildit [ December 27th, 2014, 12:19 ]
Post subject:  Re: Where is Spildit?

Hi all !
I did get upset with Data Recovery and decided to move away to other projects that were pending.
Some days ago i did start to study WD ROYL drives by picking some of them and damage them at the firmware level, like erasing/damaging the DIR module, erasing SA, damaging ROM, etc ....
By now i DO have a good understanding of the way the WD firmware works and finaly i think that i did manage to master it in a decent level and i'm able to recover from a lot of cases using my own tricks that i've discovered along the way, like loading DIR module on software RAM to find the rst of the modules on the drive and write it back without hot swap, etc ....
I think that i manage to learn a lot after this long break on DR :)
By now i have a good understanding on Seagate, WD and Samsung. I'm moving to the maxtors now.
Regards and let's hope that i manage to make more progress on the new year.

Author:  pikus_09 [ December 27th, 2014, 16:15 ]
Post subject:  Re: Where is Spildit?

So, what now? great come back on the forum !? :)

Author:  Amarbir[CDR-Labs] [ December 28th, 2014, 12:54 ]
Post subject:  Re: Where is Spildit?

Spildit wrote:
Hi all !
I did get upset with Data Recovery and decided to move away to other projects that were pending.
Some days ago i did start to study WD ROYL drives by picking some of them and damage them at the firmware level, like erasing/damaging the DIR module, erasing SA, damaging ROM, etc ....
By now i DO have a good understanding of the way the WD firmware works and finaly i think that i did manage to master it in a decent level and i'm able to recover from a lot of cases using my own tricks that i've discovered along the way, like loading DIR module on software RAM to find the rst of the modules on the drive and write it back without hot swap, etc ....
I think that i manage to learn a lot after this long break on DR :)
By now i have a good understanding on Seagate, WD and Samsung. I'm moving to the maxtors now.
Regards and let's hope that i manage to make more progress on the new year.


Hi Spildit
Maxtors why maxtors now .Do you folks still get em for DR ,they are randomlyfew in india imho .even Salvation tool is superb for maxtor " surprisingly lol "

Author:  Spildit [ December 28th, 2014, 14:29 ]
Post subject:  Re: Where is Spildit?

Maxtors just because :

1 - I have tools foe them,
2 - I want to study "all" of the HDD brands in orther to try and understand the basic of firmware on all of them and the diferences of drive to drive.
3 - I have some time to spare on studying HDD again.

Regards.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/