Poor old Seagate can't even get this right.
Attachment:
Thermal_pad_offset_2.jpg [ 174.16 KiB | Viewed 14087 times ]
Attachment:
Thermal_pad_offset_1.jpg [ 104.68 KiB | Viewed 14087 times ]
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Thermal pads offset http://forum.hddguru.com/viewtopic.php?f=9&t=42390 |
Page 1 of 1 |
| Author: | fzabkar [ May 10th, 2022, 15:50 ] |
| Post subject: | Thermal pads offset |
Poor old Seagate can't even get this right. Attachment: Thermal_pad_offset_2.jpg [ 174.16 KiB | Viewed 14087 times ] Attachment: Thermal_pad_offset_1.jpg [ 104.68 KiB | Viewed 14087 times ] |
|
| Author: | Amarbir[CDR-Labs] [ May 11th, 2022, 14:16 ] |
| Post subject: | Re: Thermal pads offset |
Well, True target should be bang on in the center ,Thats were all the magic is "Heat " ,I wonder if they have a robot malfunction 
|
|
| Author: | fzabkar [ May 11th, 2022, 14:27 ] |
| Post subject: | Re: Thermal pads offset |
You can see the square imprint of the casting in the first photo. Obviously the component placement in the design of this particular PCB does not match the design of the casting. |
|
| Author: | Amarbir[CDR-Labs] [ May 11th, 2022, 14:31 ] |
| Post subject: | Re: Thermal pads offset |
Well, Mad engineers ,What else can be said frank sir . |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|