MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 7:23 
Offline

Joined: April 15th, 2010, 7:14
Posts: 3
Location: Maine
So I just found out that this really helps when dealing with a broken hard drive. I just dont understand why. Any ideas?

- MyBook WD 500 GB USB
- HD stopped mounting, but no clicking noise is heard. Tools like RTT can see it as WDxxyxxyxx
- HD was more and more sporadically mountable and eventually not mounting at all on the desktop
- Found a way to see the hard drive: if I unplug BOTH power and USB cord from HD and computer, the HD will mount again
- Win7 will ask if I want to Scan and Fix it ,I click no
- when manually copying data to a different HD there are lots of errors and I'm forced to skip a lot of files.
- after each error, It wont allow me to copy anything else and I have to unplug and plug back again.
- tried imaging the whole...get blue screen all the times and start all over.

Why is this happening and what the problem could possibly be? This is the second HD I recover this way, but boy what a pain!

Thanx for inputs.


Top
 Profile  
 
 Post subject: Re: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 7:57 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
If you try with something more professional you will get different results and less hassle.

Disk has simply weak head/heads problem or internal problems.


Last edited by BlackST on April 15th, 2010, 8:00, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 7:58 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
Your drive has a scratch on a surface.
While you are trying to read file located on a scratch surface, drive will go into busy state until your reset it.
You will create more damages to a surface trying to copy file by file.

_________________
www.datarecoveryne.com


Top
 Profile  
 
 Post subject: Re: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 8:03 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
To me it's more head problems, than surface.... WD500 MYBOOK ...


Top
 Profile  
 
 Post subject: Re: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 8:07 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Quote:
To me it's more head problems, than surface.... WD500 MYBOOK ...


Agree.
Very common problem with WDs.


Top
 Profile  
 
 Post subject: Re: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 8:08 
Offline

Joined: April 15th, 2010, 7:14
Posts: 3
Location: Maine
BlackST wrote:
If you try with something more professional you will get different results and less hassle.

Disk has simply weak head/heads problem or internal problems.


What would you use "more professional"?
Sei Italiano? Di dove?


Top
 Profile  
 
 Post subject: Re: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 8:11 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
unknown20010 wrote:
Quote:
To me it's more head problems, than surface.... WD500 MYBOOK ...


Agree.
Very common problem with WDs.


I have to agree with that also, but I believe its a scratch. :D
In any case, have to see a drive to do accurate diagnostics.

_________________
www.datarecoveryne.com


Top
 Profile  
 
 Post subject: Re: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 8:16 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
More professional :

1) check drive / head test
2) when possible, disabling err check and reallocation
3) alternative : use HW imaging tools that can override some common problems with unstable drives.
4) alternative #2 : try different access strategies = different results. Each system has different behaviour.

P.S. that drives are crap.


Top
 Profile  
 
 Post subject: Re: Plugging and unplugging helps recovery, but why?
PostPosted: April 15th, 2010, 8:17 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Quote:
have to see a drive to do accurate diagnostics

That will end all doubts. :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 44 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group