MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
ici_lemmy
 Post subject: HTS541
PostPosted: September 5th, 2011, 6:28 
Offline
User avatar

Joined: May 3rd, 2011, 9:52
Posts: 177
Location: France
Hello,

I'm experiencing problems with an HTS541 drive.
The PC3000 cannot ID the drive and return that :
Code:
Loading modules table................................................. : Ok         
Loading the table of "open" modules................................... : Error     
Error :............................................................... : Error executing loading "open" modules dir command

I think that these modules are required for the initialisation of the HDD.

Can somebody help me with this ?

_________________
Lemmy
Top
 Profile  
 
dmarques
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 9:18 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
Hi,

Probably some main modules are damaged.
Have you checked them?
Probably PSHT.
Top
 Profile  
 
ici_lemmy
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 10:34 
Offline
User avatar

Joined: May 3rd, 2011, 9:52
Posts: 177
Location: France
PSHT was damages but i was able to repair it. And the result is the same !

EDIT : DUMP is also damaged but importance is D so i didn't touch it !

_________________
Lemmy
Top
 Profile  
 
dmarques
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 10:43 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
You say that you repaired it.
So that means that one of the copies was good? Or did you rebuilt manually and copied it to the drive?
After power reset, can you read PSHT just fine in both copies?

DUMP doesn't matter.
Top
 Profile  
 
ici_lemmy
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 10:49 
Offline
User avatar

Joined: May 3rd, 2011, 9:52
Posts: 177
Location: France
Copy 0 and 1 are bad (unreadable sector) but Factory copy was good.
So I modified module RESF with the adress of PSHT of factory copy.
Am I wrong of doing that this way ?
EDIT : after power OFF/on, copy 0 is good and copy 1 and factory are bad !

_________________
Lemmy
Top
 Profile  
 
dmarques
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 11:00 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
Ok.
So if you have copy0 fine, even if you don't get an ID, you should be able to access LBA.
Have you tried it?
Top
 Profile  
 
ici_lemmy
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 11:32 
Offline
User avatar

Joined: May 3rd, 2011, 9:52
Posts: 177
Location: France
Yes i tried and it doesn't work !

_________________
Lemmy
Top
 Profile  
 
dmarques
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 11:43 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
So something is wrong with SA yet.
Are you sure when you changed RESF, you didn't shift any other modules?
Top
 Profile  
 
ici_lemmy
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 11:58 
Offline
User avatar

Joined: May 3rd, 2011, 9:52
Posts: 177
Location: France
I'll check that.
Anyway, I think I'll send an email to PC3000 support et post here what was the problem when i find it !

_________________
Lemmy
Top
 Profile  
 
dmarques
 Post subject: Re: HTS541
PostPosted: September 5th, 2011, 12:30 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
Another option can be also to relocate SA.
Top
 Profile  
 
ici_lemmy
 Post subject: Re: HTS541
PostPosted: September 6th, 2011, 11:34 
Offline
User avatar

Joined: May 3rd, 2011, 9:52
Posts: 177
Location: France
Copying user data right now...
Thanks to Ace support who showed me this topic http://acelaboratory.ru/forum/viewtopic.php?f=30&t=7186 (you have to be logged in)
Thanks to dmarques too.

_________________
Lemmy
Top
 Profile  
 
dmarques
 Post subject: Re: HTS541
PostPosted: September 6th, 2011, 12:40 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
Ok. SA relocation solved it :D
Top
 Profile  
 
ici_lemmy
 Post subject: Re: HTS541
PostPosted: September 7th, 2011, 3:02 
Offline
User avatar

Joined: May 3rd, 2011, 9:52
Posts: 177
Location: France
I wouldn't say it was just "SA relocation" like you would do it with the WD dir editor...

_________________
Lemmy
Top
 Profile  
 
dmarques
 Post subject: Re: HTS541
PostPosted: September 7th, 2011, 5:09 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
Glad you solved it anyway.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group