MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Samsung 80GB HDD wont powerup wont spin aftr few click sound
PostPosted: May 7th, 2012, 15:05 
Offline

Joined: May 7th, 2012, 14:56
Posts: 3
Location: pakistan
Dear sir,

i have Samsung 80GB IDE hard disk, few days ago, it makes CLICKING sound, then suddenly it stop working, it wont get detected, and then after few hours it wont power up, it wont spin, i feel no vibration when i power it up..its like totally dead..

then without doing any experiments, i contact a professional data recovery guy and told this whole story,

MY QUESTION IS AS FOLLOWS:

the professional data recovery guy first say that pcb board will make it work, then after 3 days he said i will change the motor, then after 4 days he say that i will exchange PLATTERS and it require 48-50 hours to change platters from damaged hdd to new hdd.and then sector by sector copying of data etc..
and now after this talk, it almost pass 4 days more, he is saying that data is still copying..

IS HE LYING ?
WHATS THE MAIN STORY ??
WAT SHOULD I DO NOW..

PLEASE PLEASE PLEASE HELP ME,....

thank you


Top
 Profile  
 
 Post subject: Re: Samsung 80GB HDD wont powerup wont spin aftr few click s
PostPosted: May 7th, 2012, 15:08 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
faslam84 wrote:
then after 4 days he say that i will exchange PLATTERS


faslam84 wrote:
IS HE LYING ?


Absolutely.


Top
 Profile  
 
 Post subject: Re: Samsung 80GB HDD wont powerup wont spin aftr few click s
PostPosted: May 7th, 2012, 15:15 
Offline

Joined: May 7th, 2012, 14:56
Posts: 3
Location: pakistan
please tell me the STAGES to diagnose the HARD DISK problem to recover data...
as my hard disk wont spin up, wont power up...

then wat could be the step by step procedure to diagnose it...???

is it like follows : >>?????

1) check PCB ..
2) check pcb connections ??
3) check Motor ??
4) wat else ..??????
.....
...
..
.
??????

reply plz


Top
 Profile  
 
 Post subject: Re: Samsung 80GB HDD wont powerup wont spin aftr few click s
PostPosted: May 7th, 2012, 15:59 
Offline
User avatar

Joined: June 23rd, 2008, 11:26
Posts: 511
Location: Austin, TX
he is screwing with you.. finding ways to increase the cost of recovery. 50 hours to change platters... even a blind monkey with no arms could do it quicker then that.


Top
 Profile  
 
 Post subject: Re: Samsung 80GB HDD wont powerup wont spin aftr few click s
PostPosted: May 8th, 2012, 8:22 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
faslam84 wrote:
then after 4 days he say that i will exchange PLATTERS and it require 48-50 hours to change platters from damaged hdd to new hdd.and then sector by sector copying of data etc..
and now after this talk, it almost pass 4 days more, he is saying that data is still copying..

:shock:
I like the precision, 48-50, not 40-50, but 48-50 :D

faslam84 wrote:
then after 3 days he said i will change the motor

:shock: :?

As I understand it, and since they say they're copying the data, there are two cases here:
a) They can't tell their arse from their elbow, and they will eventually tell you they failed which will end up with you having a f*cked up drive with slim chances of recovery
b) You have accepted their (I presume) increased cost now and you will get your data when they decide they 've finished with inventing new solutions to non-existant problems.

Unfortunately, most likely a)

Sorry.

EDIT: Is this professional near the place you live? Can you pay them a visit and ask them to show you your drive being processed?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: Samsung 80GB HDD wont powerup wont spin aftr few click s
PostPosted: May 8th, 2012, 12:05 
Offline

Joined: May 7th, 2012, 14:56
Posts: 3
Location: pakistan
northwind wrote:
faslam84 wrote:
then after 4 days he say that i will exchange PLATTERS and it require 48-50 hours to change platters from damaged hdd to new hdd.and then sector by sector copying of data etc..
and now after this talk, it almost pass 4 days more, he is saying that data is still copying..

:shock:
I like the precision, 48-50, not 40-50, but 48-50 :D

faslam84 wrote:
then after 3 days he said i will change the motor

:shock: :?

As I understand it, and since they say they're copying the data, there are two cases here:
a) They can't tell their arse from their elbow, and they will eventually tell you they failed which will end up with you having a f*cked up drive with slim chances of recovery
b) You have accepted their (I presume) increased cost now and you will get your data when they decide they 've finished with inventing new solutions to non-existant problems.

Unfortunately, most likely a)

Sorry.

EDIT: Is this professional near the place you live? Can you pay them a visit and ask them to show you your drive being processed?



sir, i live in Pakistan, and here DATA rECOVERY professional guy is very rare....im finding it... lets see...wat happen....??

please tell me if u know the procedure to diagnose or recover data from a dead hdd


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 82 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group