Hi i have 3 maxtor 6e030l0 with corruption firmware.

I dont know which tool can use to load the correct firmware.

Can i extract the firmware from a working hd to load to the bad hd?

Thanks.

I have the same question about an Maxtor DiamondMax Plus 8 6E040L0. I have the tool to upload the firmware to the drive, but I don't have the firmware (it requires original firmware from Maxtor and they don't give it away to anybody). Any help would be greatly appreciated.

Hi guys.. I am from Indonesia.
Your problem with Aduntoredas is a simple problem.

You can use PC3000 to solve this problem.
Just download the firmware from site : http://www.hddlba.com

But first, you must check first about Specification of HDD.

Just example :
Maxtor N40P : Family.
Maxtor 6E040LO : Model.
NAR61590 : Firmware.
KMCA : Alphabetic Value.
HDA, PCBA, Unique : 510611 - AAA.
62E1 : CSR in LDR.

The sample of Configuration HDD must correct with the MODULE and MODULE GROUP (*.RPM and *.SMB) while you re-write it with PC3000.
Just testing the UBA to make sure MODULE was correct.
I know that not easy, but ......

Try it....

_________________
HDD is a COMPUTER...

hi aduntoredas

can you send me the tool to unload the firmware?

thanks.

Hello,


See also http://forum.hddguru.com/viewtopic.php?t=283.

pepe[/url]

Along, i already go to hddlba.com but the link is down... maybe u can correct this.. thanks