MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Previous topic | Next topic 
Author Message
oferav12
 Post subject: zero capacity
PostPosted: June 14th, 2013, 6:12 
Offline

Joined: March 28th, 2013, 3:00
Posts: 27
Location: thailand
hallo all
i have seagate 160GB st9160412asg
He stopped working
Once i connect it shows blue screen
is spinning and not clicking
if i connect to imager and its ready and i do scan and is said to me zero capacity
someone know what is the problem?
if its the platter or heads?
tnx for help
Top
 Profile  
 
pcimage
 Post subject: Re: zero capacity
PostPosted: June 14th, 2013, 14:30 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Does it ID correctly?

With correct model and serial?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
oferav12
 Post subject: Re: zero capacity
PostPosted: June 15th, 2013, 0:12 
Offline

Joined: March 28th, 2013, 3:00
Posts: 27
Location: thailand
yes i can see the model
Top
 Profile  
 
oferav12
 Post subject: Re: zero capacity
PostPosted: June 16th, 2013, 11:10 
Offline

Joined: March 28th, 2013, 3:00
Posts: 27
Location: thailand
someone?
Top
 Profile  
 
mr_spokk
 Post subject: Re: zero capacity
PostPosted: June 16th, 2013, 11:51 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
Sounds like SA or FW corruption.

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se
Top
 Profile  
 
fzabkar
 Post subject: Re: zero capacity
PostPosted: June 16th, 2013, 16:40 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16958
Location: Australia
Clear SMART and/or G-list ???

_________________
A backup a day keeps DR away.
Top
 Profile  
 
oferav12
 Post subject: Re: zero capacity
PostPosted: June 16th, 2013, 23:33 
Offline

Joined: March 28th, 2013, 3:00
Posts: 27
Location: thailand
what do u mean?
Top
 Profile  
 
oferav12
 Post subject: Re: zero capacity
PostPosted: June 18th, 2013, 1:12 
Offline

Joined: March 28th, 2013, 3:00
Posts: 27
Location: thailand
What is Clear SMART and G-list ???
Can u explain to me?
Top
 Profile  
 
HaQue
 Post subject: Re: zero capacity
PostPosted: June 18th, 2013, 1:54 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
hi, if you need it explained, then you should NOT be trying it. maybe look through this forum for those terms, have a read and get familiar with what they are, and then come back and re-ask for the help you think you should need.

Im not being an ass, but you are putting your data at greater risk if you start trying this stuff without knowing alot more. you will see what I mean after youve read a bit. This stuff is not like a windows issue where you can copy a commandline fix from a forum and run it quite safely to maybe fix an issue. Hard disk is one false move and your data is gone.
Top
 Profile  
 
hddguy
 Post subject: Re: zero capacity
PostPosted: June 18th, 2013, 4:07 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
HaQue wrote:
hi, if you need it explained, then you should NOT be trying it.


Not a lot else needs to be said :)
Top
 Profile  
 
fzabkar
 Post subject: Re: zero capacity
PostPosted: June 19th, 2013, 20:56 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16958
Location: Australia
@oferav12, you need to get a diagnostic report via the drive's serial terminal port.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
oferav12
 Post subject: Re: zero capacity
PostPosted: June 27th, 2013, 1:42 
Offline

Joined: March 28th, 2013, 3:00
Posts: 27
Location: thailand
what the tools i need for this?
i have only imager
Top
 Profile  
 
michael chiklis
 Post subject: Re: zero capacity
PostPosted: June 27th, 2013, 2:12 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy
You need an RS232/TTL adapter to connect the drive to a serial COM port or a UART/TTL if your computer doesn't have a serial connection but only USB.
Then you have to use a terminal program to give the right commands to reset smart and g-list, but before you should read about it.
Now you have all the information for searching about all this...

Good luck :wink:

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
oferav12
 Post subject: Re: zero capacity
PostPosted: June 28th, 2013, 0:02 
Offline

Joined: March 28th, 2013, 3:00
Posts: 27
Location: thailand
Ok thanks I will check it
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group