View topic - ST500DM002 Not Detect and No Terminal

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST500DM002 Not Detect and No Terminal

Page 1 of 1

[ 11 posts ]

Previous topic | Next topic

Author

Message

gps31

Post subject: ST500DM002 Not Detect and No Terminal

Posted: June 23rd, 2014, 4:55

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india

HDD INFO

Attachment:

ST500DM002_KC48.jpg [ 1.28 MiB | Viewed 9936 times ]

Hello Everyone

No Click Sound and no strange sound but not detected in bios and windows.
Just spinng up and Head moves to the edge of the media and stay there , No Spin down.

In Terminal Just got

Code:

Boot 0x10M
 Spin Up[0x00000000][0x0000B67C][0x0000BA10]
 Trans.

Rst 0x10M
 MC Internal LPC Process
 Spin Up
(P) SATA Reset

Then No Response

PCB Both Sides

Attachment:

ST500DM002_KC48_IN.jpg [ 2.51 MiB | Viewed 9936 times ]

Attachment:

ST500DM002_KC48_OUT.jpg [ 2.22 MiB | Viewed 9936 times ]

Let me know the How to Short the read channel and when should short them.
Please guide with the procedure.

Thankyou

Parthipan
gpsparth@gmail.com
Madurai, Tamil Nadu, India
09944552088

Top

labtech

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 23rd, 2014, 11:13

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Use keywords to search here in the forum

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

gps31

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 23rd, 2014, 12:23

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india

thanks for your reply

Searched the forum, resulting post mentioned to upload the pcb image (Topic in 2013)

I can't find answer for " At what stage i have to short the read channel ?"

Please guide me or point to the correct detailed topic

Thankyou

Top

labtech

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 23rd, 2014, 12:31

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Likely nobody would find an answer for such an expression: " At what stage i have to short the read channel ?"

And there is no exact answer as it varies. But in general, after the heads lock servo and before the reallocation begins in the background.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

HaQue

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 23rd, 2014, 18:27

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia

did you open in a clean room? I am wondering how you know:

gps31 wrote:

Just spinning up and Head moves to the edge of the media and stay there , No Spin down

Top

arztt

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 24th, 2014, 7:40

Joined: October 9th, 2012, 18:37
Posts: 66

Which contacts did you short on the PCB?

Top

gps31

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 24th, 2014, 8:58

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india

Thanks for reply

1. MHDD did not see hdd.

2. PCB Change NO EFFECT.

3. Shot ( As per 5th Reply in http://forum.hddguru.com/viewtopic.php?f=13&t=28194 )

Attachment:

ST500DM002_KC48_IN_Short.jpg [ 2.26 MiB | Viewed 9822 times ]

Attachment:

ST500DM002_KC48_OUT_Short.jpg [ 2.01 MiB | Viewed 9822 times ]

Top

Matiw

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 24th, 2014, 10:41

Joined: November 15th, 2012, 17:47
Posts: 226

Did you click CTRL+Z after Sata reset is shown on the screen ?

Quote:

HDD INFO

No Click Sound and no strange sound but not detected in bios and windows.
Just spinng up and Head moves to the edge of the media and stay there , No Spin down.

In Terminal Just got

[code]Boot 0x10M
Spin Up[0x00000000][0x0000B67C][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Then No Response

Top

gps31

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 24th, 2014, 11:48

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india

Quote:

Did you click CTRL+Z after Sata reset is shown on the screen ?

No response for Ctrl+Z

just hang with (P) SATA Reset

Top

labtech

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 24th, 2014, 13:00

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Read the forum more and be patient with the terminal

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

gps31

Post subject: Re: ST500DM002 Not Detect and No Terminal

Posted: June 25th, 2014, 4:29

Joined: January 18th, 2010, 23:53
Posts: 346
Location: india

http://translate.google.co.in/translate?hl=en&sl=ru&u=http://forum.ru-board.com/topic.cgi%3Fforum%3D84%26topic%3D4756%26glp&prev=/search%3Fq%3DFAIL%2B%2BServo%2BOp%253D0155%2BResp%253D0007%2B%2BResponseFrame%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0800%25600000%2B0000%2B0000%2B0000%2B000Ax%255B0x00025CB4%255D%255B0x00025CB4%255DZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZ%2BZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM%26client%3Dfirefox-a%26hs%3D3Zj%26rls%3Dorg.mozilla:en-US:official%26channel%3Dsb

Quote:

When you turn the spindle spins without extraneous sounds system and the BIOS is not detect, it is necessary to close the read channel recording, reading and closes here that occur Spin Up [0x00000000] [0x0000B67C] [0x0000BA10]

is it correct ? but I could not lock terminal

Top

Page 1 of 1

[ 11 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: michael chiklis and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum