��@��
��
v\v\v\v\t\v\v\v\v\v^v^v^v^v^v\v\v\v^v^v^
 SIM Errob 1002
(P) SAT@ Reset

S
Error 1002v^v^v^v^v^v^v\v^v^v^v^v^v^v^v^v^v^v^v^v^
SIM Error 1002 PASSv^v^v^v^v^v^v^v^v^v^
RW: Error processing Performance Parameter File: 2 3C
(DOS)STE OUGHT: 0x00619B70 - 0x006206AF
(DOS)CMP
(DOS(STE OQGHT: 0x0062 6B0 - 0x0062682F
(DOS)CMP
(DOS)SPE OUGHT: 0x005F6FB0 - 0x005FDAEF
(DOS)CMPv^v^v^v^v\v^v^v\v^v^
(DOS)STE OUGHT: 0x005FDAF0 - 0x00603C6F
(DOS)CMP
(DOS)STE OUGHT8 0x064C3643 - 0x064C9DE6

omg at least write what HDD you have

First of all, there are very weird characters in terminal probably caused by some voltage problems in connection between UART and HDD, or voltage problems in HDD itself

I know its a Seagate does that narrow it down ?

What is a problem?

_________________
Luke
Recovery Force Data Recovery

After seeing numerous terminal logs of this type, I've come to the conclusion that people omit the ground wire because they don't understand its importance.

_________________
A backup a day keeps DR away.

Problem IS :
(1) SIM Error 1002 PASS
(2) RW: Error processing Performance Parameter File: 203C
(3) (DOS)STE OUGHT: 0x00619B70 - 0x006206AF
(4) (DOS)CMP
(5) u need get access in my mind.
(6) u need get access in my mind.

Yours Friend.
Jignesh Pankhania.

Hi Fran
What you want to say

He is saying that the ground wire is important even though the circuit seems to work without it. Some people don't connect it not realising this.

Hi HaQue!
Thanks 4 your quick response.


are you speaking about terminal GND? or what GND?

just connect ground of UART (RS232-TTL adapter or whatever you call it ) to HDDs ground (pin next to RX and TX pins, or ground from power supply, it should not matter, they are connected together).

Thaks Jano, i wsas not sure about what HaQue and other was speaking

so many thanks