Hello

I'm working with a Seagate Grenade model ST1000DM003.

Initial problem: head bad, hdd clicking

I find a compatible donor, and I did swap head...

When power on disk, it can read servo marks (doesn't clickin, has sounds how a new HDD), but doesn't read ID... stay Busy all the time.

On terminal, didn't send F3, nothing works/answer, Ctrl Z X L ... nothing...

I tried did the short, but I haven't success.

The HDD continue doing the read of servo marks.

The PCB is 100%, I tested in others disks.

------------------
======Terminal log:
Boot 0x40M
Spin Up
RECOV Servo Op=0100 Resp=0005
TCC-0019[0x0000636F][0x0000636F]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddW
PreampFaultStatus = 0000YW
PreampFaultStatus = 0000YWMMMMMM
RECOV Servo Op=0155 Resp=0005S
RECOV Servo Op=0055 Resp=0005xxxxZWZWZWZWZWZWZWZW

-------------------

Thanks by any idea/tip...

_________________
Нет ничего невозможного

You need to short at a different time.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners