View topic - WD Firmware request 30078

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WD Firmware request 30078

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

deftrue

Post subject: WD Firmware request 30078

Posted: April 15th, 2015, 8:52

Joined: October 22nd, 2013, 5:27
Posts: 234
Location: Spain

Hello there,

Please I'd appreciate if somebody could share a firmware for the following drive (need loader):

Man.: WD
Model: WD10JMVW
FW version: 00030078

Thank you very much.

Top

pcimage

Post subject: Re: WD Firmware request 30078

Posted: April 15th, 2015, 9:03

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Full model and family please.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

deftrue

Post subject: Re: WD Firmware request 30078

Posted: April 15th, 2015, 9:07

Joined: October 22nd, 2013, 5:27
Posts: 234
Location: Spain

Sorry, the family is 11S5XS0 (that also completes the model). Can't find a FW match in hddguru files...

Cheers.

Top

chinopk

Post subject: Re: WD Firmware request 30078

Posted: April 15th, 2015, 9:32

Joined: March 20th, 2010, 4:34
Posts: 256
Location: Turkey

deftrue wrote:

Man.: WD
Model: WD10JMVW
FW version: 00030078

probably a Firebird family,

_________________
RAID/Server Recovery

Top

data-medics

Post subject: Re: WD Firmware request 30078

Posted: April 15th, 2015, 9:37

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI

Yes, definitely is Firebird. Looks like I had one with that FW here before as a heads donor, but apparently I never backed up the modules/tracks. I only backed up the ROM. Too bad.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company

Top

deftrue

Post subject: Re: WD Firmware request 30078

Posted: April 15th, 2015, 10:01

Joined: October 22nd, 2013, 5:27
Posts: 234
Location: Spain

Yep, it's a Firebird - or at least, the PCB is recognized as such.

Cheers

Top

Mikippp

Post subject: Re: WD Firmware request 30078

Posted: April 15th, 2015, 10:05

Joined: May 30th, 2005, 17:07
Posts: 542

Hi,
You're welcome...

Mikippp

Code:

>Techno mode key
>Techno mode key......................... : Ok
> 
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
> 
>Zone allocation table................... : Ok
>SA SPT.................................. : 1437
> 
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 03.78C
>ROM generation.......................... : 03.79C
>Link table version...................... : TP.4D.
>Consolidated ROM version................ : 00030078
> 
>ROM Modules:
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 73 266
>SA regions address...................... : by default
>SA Translator loading................... : Ok
!SA defects assigned..................... : 3
> 
>Heads configuration..................... : by map
>Heads number............................ : 4
>Heads number in use..................... : 4
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3
>ROM Firmware version.................... : 00030078
> 
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1,Copy 2,Copy 3
> 

Attachments:

ROM.zip [648.67 KiB]
Downloaded 323 times

Top

deftrue

Post subject: Re: WD Firmware request 30078

Posted: April 15th, 2015, 10:17

Joined: October 22nd, 2013, 5:27
Posts: 234
Location: Spain

Mikippp wrote:

Hi,
You're welcome...

Mikippp

Code:

>Techno mode key
>Techno mode key......................... : Ok
> 
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
> 
>Zone allocation table................... : Ok
>SA SPT.................................. : 1437
> 
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 03.78C
>ROM generation.......................... : 03.79C
>Link table version...................... : TP.4D.
>Consolidated ROM version................ : 00030078
> 
>ROM Modules:
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 73 266
>SA regions address...................... : by default
>SA Translator loading................... : Ok
!SA defects assigned..................... : 3
> 
>Heads configuration..................... : by map
>Heads number............................ : 4
>Heads number in use..................... : 4
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3
>ROM Firmware version.................... : 00030078
> 
>Service area:
>Permanent overlay....................... : Loaded
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1,Copy 2,Copy 3
> 

Thank you very much :wink:

Top

Page 1 of 1

[ 8 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum