MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Previous topic | Next topic 
Author Message
tonichd
 Post subject: How to repair ?
PostPosted: May 19th, 2015, 6:44 
Offline

Joined: May 19th, 2015, 6:42
Posts: 1
Location: italy
i have seagate 1000 gb FreePlay ST1000LM010 i attach the log file on linux .. there is a way to understand if is logic board or mechanical dead? thank you!


Attachments:
hd.txt [51.24 KiB]
Downloaded 523 times
Top
 Profile  
 
pcn
 Post subject: Re: How to repair ?
PostPosted: May 19th, 2015, 13:45 
Offline
User avatar

Joined: July 12th, 2014, 6:24
Posts: 91
Location: Berlin, Germany
Code:
[280056.885428] end_request: I/O error, dev sdb, sector 4
[280056.885435] Buffer I/O error on device sdb, logical block 1


It's a mechanical problem: bad blocks / media damage / weak heads. If drive spins and you get a error log your pcb is fine.

_________________
030 Datenrettung Berlin GmbH (Germany)
HDD, SSD, NAS, RAID Datenrettung - 030-datenrettung.de
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: How to repair ?
PostPosted: May 22nd, 2015, 15:56 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
tonichd wrote:
i have seagate 1000 gb FreePlay ST1000LM010 i attach the log file on linux .. there is a way to understand if is logic board or mechanical dead? thank you!


Well,
Best idea is to hook to terminal and see the data output

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
pcimage
 Post subject: Re: How to repair ?
PostPosted: May 22nd, 2015, 16:04 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK
It's not a PCB issue, as already mentioned.

If the data is important then seek pro assistance, but if it's not worth spending any money and assume the DIY risks then you can try cloning with a non-windows sector cloner such as dd_rescue or media tools pro. Then scan the resultant clone with recovery software such as rstudio or getdataback.

****DIY COMES WITH RISK TO DATA****

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: How to repair ?
PostPosted: May 22nd, 2015, 16:40 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
pcimage wrote:
It's not a PCB issue, as already mentioned.

If the data is important then seek pro assistance, but if it's not worth spending any money and assume the DIY risks then you can try cloning with a non-windows sector cloner such as dd_rescue or media tools pro. Then scan the resultant clone with recovery software such as rstudio or getdataback.

****DIY COMES WITH RISK TO DATA****


Well,
i do not have any experience with ddrescue yet but pmt you can use ctrl-s and set retry counts to 0 :mrgreen:

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: How to repair ?
PostPosted: May 22nd, 2015, 17:59 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Spildit wrote:
Amarbir wrote:
Well,
i do not have any experience with ddrescue yet but pmt you can use ctrl-s and set retry counts to 0 :mrgreen:


What ? :shock: :shock: :shock:


Well,
Are You Shocked That i do not use ddresque or you did not understand what i said about PMT .PMT = Prosoft Media Tools

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: How to repair ?
PostPosted: May 22nd, 2015, 18:14 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Spildit wrote:
Amarbir wrote:
Spildit wrote:
Amarbir wrote:
Well,
i do not have any experience with ddrescue yet but pmt you can use ctrl-s and set retry counts to 0 :mrgreen:


What ? :shock: :shock: :shock:


Well,
Are You Shocked That i do not use ddresque or you did not understand what i said about PMT .PMT = Prosoft Media Tools


Sorry my bad.

Because on the other post you were talking about TTL terminal i assumed that you were saying for the OP to use something like CTRL+S on the terminal ...

I didn't realize you were talking about Prosoft Media tools.

In any case if this was my drive i would check with terminal first, then disable relocation and then attempt to clone with hardware.


Well,
This will happen when one of us you and me included will not read a thread or post properly .You are excused your highness ,But i like you stepping on my tail adds horsepower learning capability lol

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: ccc, pepe and 89 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group