View topic - WD15EADS-22P8B0

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WD15EADS-22P8B0 - can't format

Page 1 of 1

[ 5 posts ]

Previous topic | Next topic

Author

Message

pikus_09

Post subject: WD15EADS-22P8B0 - can't format

Posted: September 18th, 2015, 17:21

Joined: November 24th, 2013, 18:13
Posts: 421
Location: Poland

Hello, I have a rather unusual problem because the patient WD15EADS-22P8B0 despite the fact that the test heads are SA and UA shows the efficiency of all six heads does not want format the user area. I would add that format stops in the area of the LBA 13000000 computer freezes and the end of the format. What wrong?
I can also run selfscan/ARCO test's. Any suggestions?
Log:

Code:

Test heads in User Area
2015-09-18 17:13:06: The drive WDC WD15EADS-22P8B0 SN: WD-WMAVU3820921 Disk size 2930277168 - 1500Gb FW:007700C7/01.00.A01
2015-09-18 17:13:08: P-list read successfully
2015-09-18 17:13:38: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 0 - Ok
2015-09-18 17:13:44: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 0 - Ok
2015-09-18 17:14:07: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 1 - Ok
2015-09-18 17:14:11: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 1 - Ok
2015-09-18 17:14:34: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 2 - Ok
2015-09-18 17:14:40: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 2 - Ok
2015-09-18 17:15:03: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 3 - Ok
2015-09-18 17:15:09: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 3 - Ok
2015-09-18 17:15:37: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 4 - Ok
2015-09-18 17:15:43: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 4 - Ok
2015-09-18 17:20:32: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 5 - Ok
2015-09-18 17:20:38: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 5 - Ok

Code:

Test heads in Service Area
2015-09-18 22:36:31: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 0 - Ok
2015-09-18 22:36:37: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 0 - Ok
2015-09-18 22:36:57: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 1 - Ok
2015-09-18 22:37:03: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 1 - Ok
2015-09-18 22:37:23: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 2 - Ok
2015-09-18 22:37:29: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 2 - Ok
2015-09-18 22:37:49: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 3 - Ok
2015-09-18 22:37:55: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 3 - Ok
2015-09-18 22:38:15: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 4 - Ok
2015-09-18 22:38:20: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 4 - Ok
2015-09-18 22:38:40: Çŕďčńü ňđĺęŕ ďî ăîëîâęĺ 5 - Ok
2015-09-18 22:38:46: ×ňĺíčĺ ňđĺęŕ ďî ăîëîâęĺ 5 - Ok

Code:

Selfscan procedure
2015-09-18 22:50:23: Number of the current test is set to 1
2015-09-18 22:50:24: Module IDE6 cleared
2015-09-18 22:50:24: Module IDFA cleared
2015-09-18 22:50:24: Module IDFB cleared
2015-09-18 22:50:24: Module IDFC cleared
2015-09-18 22:50:24: Module IDFD cleared
2015-09-18 22:50:25: Module IDFE cleared
2015-09-18 22:50:26: Module IDE0 cleared
2015-09-18 22:50:27: Module IDE1 cleared
2015-09-18 22:50:29: Module IDE2 cleared
2015-09-18 22:50:30: Module IDE3 cleared
2015-09-18 22:50:32: Module IDE4 cleared
2015-09-18 22:50:33: Module IDE5 cleared
2015-09-18 22:50:33: Error reading module E8, state -Module not in Dir???
2015-09-18 22:50:33: Error cleaning module IDE8
2015-09-18 22:50:33: Error reading module E9, state -Module not in Dir???
2015-09-18 22:50:33: Error cleaning module IDE9
2015-09-18 22:50:33: Error reading module EA, state -Module not in Dir???
2015-09-18 22:50:33: Error cleaning module IDEA
2015-09-18 22:50:33: Error reading module EB, state -Module not in Dir???
2015-09-18 22:50:33: Error cleaning module IDEB
2015-09-18 22:50:33: Error reading module EC, state -Module not in Dir???
2015-09-18 22:50:33: Error cleaning module IDEC
2015-09-18 22:50:33: Error reading module ED, state -Module not in Dir???
2015-09-18 22:50:33: Error cleaning module IDED
2015-09-18 22:50:33: RELO-List is cleared
2015-09-18 22:50:34: P-List is cleared
2015-09-18 22:50:35: G-List is cleared
2015-09-18 22:50:35: T-List is cleared
2015-09-18 22:50:35: Translator cleared
2015-09-18 22:50:36: SelfScan started
2015-09-18 22:51:13: Îřčáęŕ: Head: 1 Track: -189 (0xFFFFFF43) Err: BG_PST_UNABLE_TO_LOAD_PTM
ARCO 47 Test
2015-09-18 01:20:22: Ęîä ďđîčçâîäčňĺë˙ ăîëîâîę - A
2015-09-18 01:20:22: Ęîä ďđîčçâîäčňĺë˙ ďëŕńňčí - K
2015-09-18 01:20:40: ARCO Code successfully loaded into RAM
2015-09-18 01:20:40: ARCO Data successfully loaded into RAM
2015-09-18 01:20:40: Error starting calibrator test Full Arco, state - BE01

Code:

PCB: 2060-771640-003 REV P1
PCB Stricker: 2061-771640-M03-AA
MCU: 88i9045-TJF2
FLASH: PM25LD020

Ps. I using WDMARVEL 7A Beta HDD repair tool (full version)

sorry for my english, because am using google translator.

_________________
Hello everyone, sorry for my poor english, because i using google translator.

Top

BGman

Post subject: Re: WD15EADS-22P8B0 - can't format

Posted: September 19th, 2015, 13:39

Joined: September 30th, 2005, 7:33
Posts: 849

Most likely scratch on the surface.

Top

jermy

Post subject: Re: WD15EADS-22P8B0 - can't format

Posted: September 19th, 2015, 13:49

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal

Have you tried regenerate translator ?

Top

pikus_09

Post subject: Re: WD15EADS-22P8B0 - can't format

Posted: September 19th, 2015, 18:42

Joined: November 24th, 2013, 18:13
Posts: 421
Location: Poland

Yes, i do. nothing was change. Remind you also that I can not run the procedure selfscan.

_________________
Hello everyone, sorry for my poor english, because i using google translator.

Top

pikus_09

Post subject: Re: WD15EADS-22P8B0 - can't format

Posted: September 21st, 2015, 16:31

Joined: November 24th, 2013, 18:13
Posts: 421
Location: Poland

Ehh, HDD works fine, the problem was power connected to the drive. I'm sorry for the confusion.

_________________
Hello everyone, sorry for my poor english, because i using google translator.

Top

Page 1 of 1

[ 5 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 210 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum