MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 4
  [ 78 posts ]  Go to page 1, 2, 3, 4  Next
  Previous topic | Next topic 
Author Message
Nick_CT
 Post subject: New WD 3TB 2.5" Passport
PostPosted: February 12th, 2016, 9:30 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa
Have you guys had experience with this yet? New PCB layout and different terminal connection. MCU is 88i1047-NDB2


Attachments:
Photo 2016-02-12, 2 54 56 PM.jpg
Photo 2016-02-12, 2 54 56 PM.jpg [ 1.68 MiB | Viewed 20406 times ]
Photo 2016-02-12, 2 57 57 PM.jpg
Photo 2016-02-12, 2 57 57 PM.jpg [ 1.73 MiB | Viewed 20406 times ]

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
jermy
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: February 12th, 2016, 10:05 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
whats the problem ?
Top
 Profile  
 
Nick_CT
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: February 12th, 2016, 10:08 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa
jermy wrote:
whats the problem ?


Probably relo list, want to convert to SATA.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
jermy
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: February 12th, 2016, 10:24 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
check if there is E71-75 (on the other side), and if there is check if it's the SATA Tx/Rx (probably yes)
Top
 Profile  
 
fzabkar
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: February 12th, 2016, 18:04 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16954
Location: Australia
Obviously you should be looking for two pairs of capacitors and two sets of parallel traces. The bottom of your PCB would probably show them up better.

Here is my guess:
Attachment:
SATA-Tx-Rx.jpg
SATA-Tx-Rx.jpg [ 19.87 KiB | Viewed 20319 times ]

A Google search for PCBs with the 88i1047-NDB2 controller turns up the following candidates:

    2060-771978
    2060-771942
    2060-800001-002

Here is a low res photo of the 2060-771978 PCB:
http://g02.a.alicdn.com/kf/HTB1CYxsIXXX ... For-WD.jpg

You can see the SATA Tx/Rx pins of the MCU.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
bcometa
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 19th, 2016, 17:54 
Offline
User avatar

Joined: December 13th, 2008, 13:35
Posts: 308
Location: Los Angeles, CA USA
Hi Nick, did you ever find a compatible sata donor?

_________________
$300 Data Recovery - Los Angeles Data Recovery
Top
 Profile  
 
jono-ats
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 19th, 2016, 19:19 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
We've got one of these with bad heads.

There is not a SATA donor yet, AFAIK.

Swapping the stack of 10 heads is a bit tricky -- a post is in the way.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
jono-ats
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 19th, 2016, 19:23 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
We've got one of these with bad heads.

There is not a SATA donor yet, AFAIK.

Swapping the stack of 10 heads is a bit tricky -- a post is in the way.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
bcometa
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 20th, 2016, 14:36 
Offline
User avatar

Joined: December 13th, 2008, 13:35
Posts: 308
Location: Los Angeles, CA USA
Thanks Jono! I also asked Ace, if they write back with different info, i'll update this post.

_________________
$300 Data Recovery - Los Angeles Data Recovery
Top
 Profile  
 
Nick_CT
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 11:37 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa
There's not compatible SATA board to my knowledge, how to go the solder-tiny-wires route, not my idea of fun.

Jon, do you have a pic of the internals? I'm hoping I don't have to open my one up.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
jono-ats
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 12:42 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
Attachment:
WD 3TB Passport.JPG
WD 3TB Passport.JPG [ 130.48 KiB | Viewed 20003 times ]
Here are some internal shots.

Note that there is not a lot of clearance for a head comb, due to the nearby post for the preamp connector. 5 platters and 10 heads.

I think the SATA data may be among the two pairs of caps shown going to the bridge IC.

This 3TB drive is from the Spyglass family.

Jon


Attachments:
Spyglass SATA.jpg
Spyglass SATA.jpg [ 194.04 KiB | Viewed 20003 times ]
Spyglass PCB.JPG
Spyglass PCB.JPG [ 216.95 KiB | Viewed 20003 times ]
3 TB post.JPG
3 TB post.JPG [ 137.44 KiB | Viewed 20003 times ]

_________________
http://www.datasaversllc.com
Top
 Profile  
 
MindMergepk
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 13:34 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 838
Location: Pakistan
thanks for sharing.

_________________
Data Recovery Pakistan
Top
 Profile  
 
lcoughey
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 14:11 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2573
Location: Ontario, Canada
Would a SATA drive from this series be compatible?

WD30NPRZ - http://www.wdc.com/en/products/products ... d=800#Tab3

_________________
Luke
Recovery Force Data Recovery
Top
 Profile  
 
data-medics
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 14:38 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
I think I'd try one of these: http://www.ebay.com/itm/New-WD-Green-WD ... SwuAVW0Mz1

Probably will have the right PCB at least.

What's the board number of the USB PCB? Is it: 2060-800041 ?

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company
Top
 Profile  
 
jono-ats
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 16:29 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
In my case it is 800041.

Jon

_________________
http://www.datasaversllc.com
Top
 Profile  
 
Doomer
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 17:03 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
data-medics wrote:
I think I'd try one of these: http://www.ebay.com/itm/New-WD-Green-WD ... SwuAVW0Mz1

It is compatible
Apparently its PCB is 800022

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
data-medics
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 19:46 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
That's what I thought. Thanks for confirming the board number! I've updated my compatibility list: https://www.data-medics.com/forum/wd-pa ... 3.html#p26

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company
Top
 Profile  
 
LarrySabo
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 20:17 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
data-medics wrote:
That's what I thought. Thanks for confirming the board number! I've updated my compatibility list: https://www.data-medics.com/forum/wd-pa ... 3.html#p26


.. but forgot to update the "Revised" date. (The mind is the second thing to go, Jared. Ask the wife what's first. :lol: )

_________________
Sabo Computer Repairs & Data Recovery
Top
 Profile  
 
HaQue
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 22:46 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
LarrySabo wrote:
data-medics wrote:
That's what I thought. Thanks for confirming the board number! I've updated my compatibility list: https://www.data-medics.com/forum/wd-pa ... 3.html#p26


.. but forgot to update the "Revised" date. (The mind is the second thing to go, Jared. Ask the wife what's first. :lol: )

The Money? :)
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: New WD 3TB 2.5" Passport
PostPosted: March 21st, 2016, 22:55 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Doomer wrote:
data-medics wrote:
I think I'd try one of these: http://www.ebay.com/itm/New-WD-Green-WD ... SwuAVW0Mz1

It is compatible
Apparently its PCB is 800022


Doomer Sir ,
Have You Tried This Yourself .As Far As I am concerned Its a Matter of 5 Minutes To Trace the Traces of SATA From MCU .

Respected Jon ,
Anything In Between The Heads For Separation [ Like Pill Foil ] Etc Would Do And Once PCB Connector Of The HSA is Out I am Sure Its a Easy Job .Lately We Have Started To See Many 10 Head Drives in HDDguru in 3.5" Form Factor And Also Now 2.5" Form Factor .Is it even Fatter Then the 2TB's They Are Selling Sir

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 4
  [ 78 posts ]  Go to page 1, 2, 3, 4  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: tahitibub and 32 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group