hi everyone,

this drive is detected by deepspar imager as drdy dsc but I don't hear any sound of platter spinning. when I do rescan it report correct model, correct serial no. but wrong lba. at the top, there is additional ERR and ABRT registers shown after rescan. even the time of rescanning, I also don't hear any sound of platter spinning. all the time I don't hear any sound of platter spinning. it's so weird. I have HD doctor for Seagate but it's too old. it cannot use with this drive model. it can't detected. I would like to know if it is both head and firmware problem. and please recommend me the solution. I am not sure if I change the head, the drive will work. please help me. thank you.

You need to use terminal

Good luck

_________________
I am from cuudulieuocung.org and I am currently banned from this forum for creating multiple accounts to promote my crappy website.

How would this work on a drive that isn't spinning?

It's not a "one size fits all" fix!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

If don't trust the machine, just use an external power supply along with MHDD to confirm spinning and status register.

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts

thank you all.

btw, the order of the commands is completely wrong...

_________________
Adatmentés - Data recovery