MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
Karel
 Post subject: 50P flatcable needed with a COMAX E187825 FC-50P connector.
PostPosted: August 16th, 2016, 18:31 
Offline

Joined: March 24th, 2014, 18:04
Posts: 13
Location: Netherlands
I need this flabcable. It is broken inside.

http://myalbum.com/albums/sJej9B4bqUOX

On the connector is written COMAX E187825 FC-50P.

Length is plm 10 centimeter.

The other end is a soldered connector to a board.
Top
 Profile  
 
jermy
 Post subject: Re: 50P flatcable needed with a COMAX E187825 FC-50P connect
PostPosted: August 16th, 2016, 23:02 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
Is it this one ?
Or you can DIY, buy this cable, cut it (10CM) solder one side
Top
 Profile  
 
Karel
 Post subject: Re: 50P flatcable needed with a COMAX E187825 FC-50P connect
PostPosted: August 17th, 2016, 5:19 
Offline

Joined: March 24th, 2014, 18:04
Posts: 13
Location: Netherlands
Sorry, I made a mistake with the link, the ccorrect link is:

http://myalbum.com/albums/sJej9B4bqUOX

if a moderator edits it in the first post it's ok by me, this message can then be deleted.

Maybe it's a SCSI cable.
Top
 Profile  
 
Karel
 Post subject: Re: 50P flatcable needed with a COMAX E187825 FC-50P connect
PostPosted: August 17th, 2016, 5:56 
Offline

Joined: March 24th, 2014, 18:04
Posts: 13
Location: Netherlands
Moderator, sorry, I made the same mistake again.

This is finally the working link:

http://myalbum.com/album/sJej9B4bqUOX

Forget/delete the last post (not this one).

I think I need a female SCSI crimp connector, I see them in the USA, but $19,50 shipping costs is too steep. So I'm looking for a European/Asian female scsi crimp connector.
Top
 Profile  
 
jermy
 Post subject: Re: 50P flatcable needed with a COMAX E187825 FC-50P connect
PostPosted: August 17th, 2016, 7:05 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
Its the same link
Top
 Profile  
 
Karel
 Post subject: Re: 50P flatcable needed with a COMAX E187825 FC-50P connect
PostPosted: August 17th, 2016, 7:21 
Offline

Joined: March 24th, 2014, 18:04
Posts: 13
Location: Netherlands
You are right Jermy. If you delete the "s" in "albums" you will have a working link. I send an improvement message but it had to be moderated.
Top
 Profile  
 
jermy
 Post subject: Re: 50P flatcable needed with a COMAX E187825 FC-50P connect
PostPosted: August 17th, 2016, 8:34 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
OK, I already managed to see those pictures yesterday, and my first reply:
jermy wrote:
Is it this one ?
Or you can DIY, buy this cable, cut it (10CM) solder one side

Stands, nothing has been changed
Top
 Profile  
 
jerovsek
 Post subject: Re: 50P flatcable needed with a COMAX E187825 FC-50P connect
PostPosted: August 17th, 2016, 9:17 
Offline

Joined: August 3rd, 2012, 7:47
Posts: 396
Location: slovenija
check this link
http://www.cablesonline.com/50pin2lainri.html
Top
 Profile  
 
jerovsek
 Post subject: Re: 50P flatcable needed with a COMAX E187825 FC-50P connect
PostPosted: August 17th, 2016, 9:18 
Offline

Joined: August 3rd, 2012, 7:47
Posts: 396
Location: slovenija
and this one
http://www.circuitsonline.net/forum/view/133301
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: napalm_atx and 36 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group