MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Previous topic | Next topic 
Author Message
stfungayi
 Post subject: st500dm002-1bd142 hp73
PostPosted: December 26th, 2018, 18:56 
Offline

Joined: August 18th, 2014, 18:42
Posts: 24
Location: zimbabwe
Hello
I have a st500dm002-1bd142 sn/z3tw3xw7 that will not spin up with the original PCB. I tried another pcb from a working hdd and it spins but is detected as wrong size 4.GB and will not show my data...if I put the ROM on another good pcb then it will not spin also .So i figured that the ROM may be corrupted.
I have attached the ROM dump if anyone can help me find what is wrong with the code in the ROM.
The pcb is the original one and the rom is the original one.


Attachments:
File comment: st500dm002-1bd142 dead
EN25F40_20181225_204243 - Copy.rar [138.58 KiB]
Downloaded 482 times
Top
 Profile  
 
digisupport
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 27th, 2018, 7:08 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 627
Location: Kolding | Denmark
Full terminal output from original drive / pcb would helt a lot more.

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk
Top
 Profile  
 
E123
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 27th, 2018, 11:55 
Offline

Joined: September 26th, 2016, 4:26
Posts: 125
Location: Russia
Original ROM has corrupt BOOT_FW in copy 0. Try this.


Attachments:
new_rom.zip [215.04 KiB]
Downloaded 447 times
Top
 Profile  
 
bcometa
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 27th, 2018, 14:58 
Offline
User avatar

Joined: December 13th, 2008, 13:35
Posts: 308
Location: Los Angeles, CA USA
@E123 could you explain how you determined this error and fixed it? I imported the "bad" ROM into PC3K and verified parts of the ROM are corrupt (error message when trying to "Show Information"). But, even after importing CAP+RAP+SAP+IAP to a donor ROM, it was still corrupt. Perhaps moving the Head Adaptives to a donor ROM could work, but I think you did something else. Just curious.
Thanks,
Brian

_________________
$300 Data Recovery - Los Angeles Data Recovery
Top
 Profile  
 
fzabkar
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 27th, 2018, 15:13 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
bcometa wrote:
@E123 could you explain how you determined this error ...

F3romExplorer :
http://www.hddoracle.com/viewtopic.php?f=22&t=2534

The first copy of the BOOT_FW segment (ID = 0x10) is located at 0x404D0 - 0x5F4CF.

Code:
Offset(h) 00       04       08       0C

00040000  D50D0000 D8040000 F0030000 400D0400  Õ...Ø...ð...@...
00040010  63736944 00003625 FFFFFFFF 20FFFFFF  csiD..6%ÿÿÿÿ ÿÿÿ
00040020  16380000 15400000 0E400200 10D00400  .8...@...@...Ð..
                                     ^^^^^^^^
00040030  00D0F401 00000000 00000000 407F0000  .Ðô.........@...\
          ^^^^^^^^

The second copy of the BOOT_FW segment (ID = 0x10) is located at 0x604D0 - 0x6F4CF.

Code:
Offset(h) 00       04       08       0C

00060000  D50D0000 D8040000 F0030000 400D0400  Õ...Ø...ð...@...
00060010  63736944 00003625 FFFFFFFF 20FFFFFF  csiD..6%ÿÿÿÿ ÿÿÿ
00060020  16380000 15400000 0E400200 10D00400  .8...@...@...Ð..
                                     ^^^^^^^^
00060030  00D0F401 00000000 00000000 407F0000  .Ðô.........@...
          ^^^^^^^^

Comparing these two segments reveals a difference in one bit.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
bcometa
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 27th, 2018, 15:41 
Offline
User avatar

Joined: December 13th, 2008, 13:35
Posts: 308
Location: Los Angeles, CA USA
THANK YOU fzabkar! I managed to figure it out and repair the ROM. :)

_________________
$300 Data Recovery - Los Angeles Data Recovery
Top
 Profile  
 
fzabkar
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 27th, 2018, 16:01 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
bcometa wrote:
THANK YOU fzabkar! I managed to figure it out and repair the ROM. :)

@E123 is the author of F3romExplorer. All credit should go to him.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
bcometa
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 27th, 2018, 16:22 
Offline
User avatar

Joined: December 13th, 2008, 13:35
Posts: 308
Location: Los Angeles, CA USA
Thanks to E123! Very cool tool to have!

_________________
$300 Data Recovery - Los Angeles Data Recovery
Top
 Profile  
 
stfungayi
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 27th, 2018, 18:03 
Offline

Joined: August 18th, 2014, 18:42
Posts: 24
Location: zimbabwe
Thank you E123 for your expertise and fzabkar for explaining.The hdd is now spinning and detectable in bios.
Would it have been possible to repair the Rom file by copying a BOOT_FW segment from another working HDD if both segments are corrupt.
Top
 Profile  
 
fzabkar
 Post subject: Re: st500dm002-1bd142 hp73
PostPosted: December 29th, 2018, 15:20 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
stfungayi wrote:
Would it have been possible to repair the Rom file by copying a BOOT_FW segment from another working HDD if both segments are corrupt.

Yes, but I would think that you would need to ensure that the code is compatible.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group